A.RIPng
B.OSPFv3
C.IS-IS for IPv6
D.static
您可能感兴趣的试卷
你可能感兴趣的试题
A.hello packets
B.SAP messages sent by other routers
C.LSAs from other routers
D.beacons received on point-to-point links
E.routing tables received from other link-state routers
F.TTL packets from designated routers
A.Each OSPF area requires a loopback interface to be configured.
B.Areas may be assigned any number from 0 to 65535.
C.Area 0 is called the backbone area.
D.Hierarchical OSPF networks do not require multiple areas.
E.Multiple OSPF areas must connect to area 0.
F.Single area OSPF networks must be configured in area 1.
A.transparent
B.auto
C.on
D.desirable
E.blocking
F.forwarding
A.amount of RAM
B.bridge priority
C.IOS version
D.IP address
E.MAC address
F.speed of the links
A.dataintegrity
B.encryption
C.keyexchange
D.authentication
A.FTP
B.Telnet
C.SMTP
D.DNS
E.HTTP
F.POP3
A.127.0.0.0
B.127.0.0.1
C.224.0.0.9
D.126.0.0.1
E.127.0.0.121
A.IP
B.X.25
C.Ethernet
D.Frame-relay
A.192.168.20.29
B.192.168.20.16
C.192.168.20.17
D.192.168.20.31
E.192.168.20.0
最新试题
请参见图示。网络技术人员使用图中所示的连接将主机A 连接到路由器以创建初始配置。下列有关此连接的陈述中哪一项正确?()
请参见图示。一台路由器(其路由表如图所示)收到发往192.168.1.4的数据包。路由器将如何处理该数据包?()
请参见图示。电缆1和电缆2分别按照特定的物理层要求接线。哪三个网段使用电缆2?()
OSI 模型的哪两项功能在第2层实现?()
请参见图示。主机B 尝试与主机C 建立TCP/IP 会话。在尝试期间,San Francisco 器由器的FastEthernet 接口fa0/1捕获到一个帧。捕获的帧中包含源IP 地址为10.10.1.2而目的IP 地址为10.31.1.20的数据包。捕获该帧时,它的目的MAC 地址是什么?()
下列哪些是私有IP 地址的地址范围?()
在Cisco IOS 设备中,启动配置文件存储于何处?()
要将数据包发送到远程网络,应使用哪种设备?()
请参见图示。下列哪组设备仅包含中间设备?()
请参见图示。某用户想要查看当前的配置。图中所示为ipconfig/all 命令的输出。从此输出可以得到哪三项结论?()