A.opening the exhaust ports
B.closing the fuel ports
C.farthest from the cylinder head
D.nearest to the cylinder head
您可能感兴趣的试卷
你可能感兴趣的试题
A.indicated horsepower
B.mean effective pressure
C.exhaust back pressure
D.compression pressure
A.the same indicated horsepower as a four-stroke/cycle engine
B.twice the indicated horsepower as a four-stroke/cycle engine
C.one half indicated horsepower as a four-stroke/cycle engine
D.one power stroke for every two crankshaft revolutions
A.opposed-piston engine
B.double-acting engine
C.two-stroke/cycle engine
D.four-stroke/cycle engine
A.more power strokes per revolution
B.the use of scavenge air
C.more complicated valve gear
D.higher working temperature of the piston and cylinder
A.less even torque
B.higher cylinder head temperatures
C.fewer power strokes per revolution
D.greater weight/size requirements
A.higher working temperature of piston and cylinder
B.the use of scavenge ports
C.fewer power strokes per revolution of the crankshaft
D.part of the fuel is burned as the piston is moving away from top dead center
A.length of the crankshaft
B.volume of the clearance space
C.weight of piston
D.length of the stroke
A.brake horsepower
B.displacement
C.cylinder volume
D.cylinder clearance
A.TBN of the lubricating oil
B.Temperature of the lube oil
C.Completeness in the mixing of the fuel and air
D.Temperature of the cooling (sea) water
A.starting air pressure
B.scavenge air pressure
C.over-speed trip
D.banjo oiler line
最新试题
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
To proceed to the assistance of a ship in distress is（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）