A.收敛的速度
B.配置简便
C.支持变长掩码
D.大规模部署
您可能感兴趣的试卷
你可能感兴趣的试题
A.debug ospf events
B.show ip ospf border-routers
C.show ip ospf neighbor
D.show ip ospf database
A.show ip traffic
B.show ip flow cache
C.show ip cache
D.None of the above
A.debug ospf events
B.show ip ospf border-routers
C.show ip ospf neighbor
D.show ip ospf database
A.Very reliable forwarding
B.Virtual routing forwarding instances
C.Vip redundancy features
D.Virtual routing format
A.show ip route
B.show ip cef
C.show ip bgp
D.show ip cache
A.show isis neigbor
B.show ospf neighbor
C.show bgp neighbor
D.show cdp neighbor
A.sh run/show log/show tech
B.show run
C.show log/show config
D.show run/sh config
A.show env xxx
B.show log
C.show clnsroute
D.show inter
A.show run
B.show config
C.show iproute
D.show log
A.snmp-server community
B.snmp-server enable
C.snmp-server log
D.snmp-server host
最新试题
7750SR的network端口1/1/1,现在需要实现queue1为尽力而为的类型,queue5为优先调度的类型,请写出qos相关的配置,假定Qos策略名为test。
7750需要通过radius服务器进行登陆用户认证,Radius服务器地址为10.1.1.1,radius接入认证密码为aaa,请写出相应的配置命令。
请写出7750的时区调整为PRC08的操作命令并同时写出修改系统时间为2009/6/108:00:00的操作命令。
请给7750路由器配置一个log 10,保存main日志文件到syslog服务器上,syslog服务器地址10.1.1.1。
在7750SR中,修改了port及bof的配置后,发现命令提示符前出现*号,需要执行哪二条命令,该*才会消失?
将7750的以太端口1/1/1,2/1/1进行捆绑,并封装为dot1q模式,请按顺序写出相应的配置。
请7750SR的主用主控板配置一个带外网管地址10.1.1.1/24,并添加一条到目的地址为20.0.0.0/24下一跳为10.1.1.2的路由。
7750SR路由器的接口test-1启用了igmp功能,使用版本2,且静态加入组播组224.1.1.1,请写出相关配置命令。
发现7750受到TCPsynflood攻击,请通过cpm-queue和cpm-filter限制该攻击流量为1Mbps,请写出相关的配置命令。
7750SR的1/1/1端口为network模式,null封装,现需要将1/1/1端口镜像到1/1/2端口,假定1/1/2端口已完成相关配置,请写出镜像的配置。假定镜像id为1.