您可能感兴趣的试卷
你可能感兴趣的试题
A.A CSU/DSU converts analog signals from a router to a leased line; a modem converts analog signals from a router to a leased line
B.A CSU/DSU converts analog signals from a router to a phone line; a modem converts digital signals from a router to a leased line
C.A CSU/DSU converts digital signals from a router to a phone line; a modem converts analog signals from a router to a phone line
D.A CSU/DSU converts digital signals from a router to a leased line; a modem converts digital signals from a router to a phone line
A.增加网络带宽
B.提高网络可用性
C.降低网络传输费用
D.防止数据传输意外中止
A.支持路由协议
B.至少具备一个备份口
C.到少支持两个网络接口
D.协议至少要实现到网络层
E.具有存储、转发和寻径功能
F.至少支持两种以上的子网协议
A.00-e0-fe-01-23-45
B.00e0.fe01.2345
C.00e.0fe.-012.345
D.00e0.fe112345
A.This command should be executed from the global configuration mode
B.The IP address 10.121.16.8 is the local router port used to forward data
C.102 is the remote DLCI that will receive the information
D.This command is required for all Frame Relay configurations
E.The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC
A.PPP
B.WAP
C.HDLC
D.MPLS
E.L2TPv3
F.ATM
A.Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the sub-interface
B.Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic
C.Configure many sub-interfaces on the same subnet
D.Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces
A.show reload
B.show boot
C.show running-config
D.show version
A.LAN
B.routing
C.WAN
D.network
A.RIPng
B.OSPFv3
C.IS-IS for IPv6
D.static
![](https://static.ppkao.com/ppmg/img/appqrcode.png)
最新试题
何时必须使用clock rate 命令配置路由器串行接口?()
请参见图示。RouterB 已经过正确配置。RouterA 的以太网接口Fa0/0已使用如图所示的命令进行配置。但是,从RouterA 的Fa0/0接口无法成功ping 通RouterB 的Fa0/0接口。应在RouterA 上采取什么措施来解决此问题?()
请参见图示。网络中的所有设备均使用默认配置。此拓扑中需要多少个逻辑地址范围?()
OSI 哪一层可提供有序的数据重构服务?()
请参见图示。主机A 和B 无法互相通信。此问题的原因是什么?()
请参见图示。主机A 尝试与主机C 建立TCP/IP 会话。在尝试期间,路由器Y 的FastEthernet 接口fa0/1捕获到一个帧。捕获的帧中包含源IP 地址为172.16.1.5而目的IP 地址为172.16.7.24的数据包。捕获该帧时,它的源MAC 地址是什么?()
请参见图示。已启用路由器的NAT 功能供PC 访问Internet。可以为路由器接口S0/0/0分配下列哪一个IP 地址?()
请参见图示。哪种逻辑拓扑是对图示网络的准确描述?()
请参见图示。网络技术人员试图确定主机A 的正确IP 地址配置。以下哪一项是主机A 的有效配置?()
要将数据包发送到远程网络,应使用哪种设备?()