A.classful routing protocol
B.variable-length subnet masks
C.broadcast addressing
D.manual route summarization
E.uses SPF algorithm to compute path
您可能感兴趣的试卷
你可能感兴趣的试题
A.WEP
B.CCKM
C.AES
D.TKIP
E.CCMP
A.ATM
B.IDS
C.IOS
D.IOX
E.IPS
F.SDM
A.ip route-static 129.1.0.016 serial 0
B.ip route-static 10.0.0.216129.1.0.0
C.ip route-static 129.1.0.01610.0.0.2
D.ip route-static 129.1.0.0255.255.0.010.0.0.2
A.It has the same maximum hop count as version 1
B.It uses broadcasts for its routing updates
C.It is a classless routing protocol
D.It has a lower default administrative distance than RIP version 1
E.It supports authentication
F.It does not send the subnet mask in updates
A.network all
B.neighbor
C.enable
D.network 10.0.0.0
A.节省网络带宽
B.防止网络中形成路由环路
C.将路由不可达信息在全网扩散
D.通知邻居路由器哪些路由是从其他处得到
A.段
B.包
C.位
D.帧
A.网络层
B.传输层
C.会话层
D.表示层
E.应用层
A.LLC
B.MAC
C.BIG MAC
A.Allow unrestricted access to the console or VTY ports
B.Use a firewall to restrict access from the outside to the network devices
C.Always use Telnet to access the device command line because its data is automatically encrypted
D.Use SSH or another encrypted and authenticated transport to access device configurations
E.Prevent the loss of passwords by disabling password encryption
最新试题
请参见图示。从主机X 发出的到主机Y 的tracert 命令已成功。下列哪一项正确地反映了追踪列表中显示的中间网络设备的顺序?()
请参见图示。RouterB 已经过正确配置。RouterA 的以太网接口Fa0/0已使用如图所示的命令进行配置。但是,从RouterA 的Fa0/0接口无法成功ping 通RouterB 的Fa0/0接口。应在RouterA 上采取什么措施来解决此问题?()
请参见图示。哪种逻辑拓扑是对图示网络的准确描述?()
请参见图示。网络中的所有设备均使用默认配置。此拓扑中存在多少个广播域?()
请参见图示。下列哪组设备仅包含中间设备?()
请参见图示。电缆1和电缆2分别按照特定的物理层要求接线。哪三个网段使用电缆2?()
何时必须使用clock rate 命令配置路由器串行接口?()
请参见图示。主机A 正在访问多台服务器。结合使用什么端口号和地址即可唯一识别特定服务器上运行的特定进程?()
请参见图示。已启用路由器的NAT 功能供PC 访问Internet。可以为路由器接口S0/0/0分配下列哪一个IP 地址?()
要将数据包发送到远程网络,应使用哪种设备?()