What can be determined from the line of show ip route output shown in the exhibit?()
A.The next routing update can be expected in 35 seconds.
B.The IP address 10.10.10.6 is configured on S0/1.
C.The IP address 10.10.10.8 is configured on S0/1.
D.This route is using the default administrative distance.
E.The 10.10.10.8 network is two hops away from this router.
您可能感兴趣的试卷
你可能感兴趣的试题
A.access-group
B.access-list
C.acl
D.firewall packet-filter xxxx inbound/outbound
A.the IP address of Switch 1
B.the MAC address of Switch 1
C.the IP address of Host C
D.the MAC address of Host C
E.the IP address of the router's E0 interface
F.the MAC address of the router's E0 interface
A.对端的IP地址和对端的x.121地址
B.对端的IP地址和本接口的x.121地址
C.本接口的IP地址和对端的x.121地址
D.本接口的IP地址和本接口的x.121地址
A.Broadcast frames are never sent to swiches.
B.Broadcast addresses use an incorrect format for the switching table.
C.A broadcast address will never be the source address of a frame.
D.Broadcasts only use network layer addressing.
E.A broadcast frame is never forwarded by a switch.
A.show ip interface [interface] access-lists
B.show ip access-lists interface [interface]
C.show ip interface [interface]
D.show ip access-lists [interface]
A.分组层
B.数据链路层
C.物理层
D.传输层
E.网络层
A.buffering
B.cut-through
C.windowing
D.congestion avoidance
E.load balancing
A.IPCP
B.LCP
C.IPXCP
D.SNA
A.DLCI
B.BECN
C.LMI
D.FECN
输入哪条命令可以看到以下信息?()
A.display ip routing-table
B.display ospf lsa
C.display ospf database
D.display ospf interface
![](https://static.ppkao.com/ppmg/img/appqrcode.png)
最新试题
请参见图示。网络中的所有设备均使用默认配置。此拓扑中存在多少个广播域?()
请参见图示。已启用路由器的NAT 功能供PC 访问Internet。可以为路由器接口S0/0/0分配下列哪一个IP 地址?()
请参见图示。图中所示路由表所属的PC 已正确配置。IP 地址192.168.1.254属于哪一个网络设备或接口?()
何时必须使用clock rate 命令配置路由器串行接口?()
请参见图示。从主机X 发出的到主机Y 的tracert 命令已成功。下列哪一项正确地反映了追踪列表中显示的中间网络设备的顺序?()
请参见图示。主机A 尝试与主机C 建立TCP/IP 会话。在尝试期间,路由器Y 的FastEthernet 接口fa0/1捕获到一个帧。捕获的帧中包含源IP 地址为172.16.1.5而目的IP 地址为172.16.7.24的数据包。捕获该帧时,它的源MAC 地址是什么?()
在配置路由器时,网络技术人员想要命名路由器。输入hostname 命令后,技术人员会看到下列哪一项提示?()
在Cisco IOS 设备中,启动配置文件存储于何处?()
请参见图示。在网络中,PC1向PC2发送了一条消息。PC2收到的帧如图所示。该帧中的哪一信息确定了正确的目的应用程序?()
请参见图示。网络中的所有设备均使用默认配置。此拓扑中需要多少个逻辑地址范围?()