多项选择题Which of the following host addresses are members of networks that can be routed across the public Internet? ()

A.10.172.13.65
B.172.16.223.125
C.172.64.12.29
D.192.168.23.252
E.198.234.12.95
F.212.193.48.254


您可能感兴趣的试卷

你可能感兴趣的试题

2.多项选择题An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? ()

A.The switch must be configured with an IP address, subnet mask, and default gateway.
B.The switch must be connected to a router over a VLAN trunk.
C.The switch must be reachable through a port connected to its management VLAN.
D.The switch console port must be connected to the Ethernet LAN.
E.The switch management VLAN must be created and have a membership of at least one switch

3.单项选择题TCP、UDP、SPX属于OSI的()。

A.网络层
B.传输层
C.会话层
D.表示层

4.单项选择题What is the effect of using the service password-encryption command?()

A.Onl ypasswords configured afte rthe command has been entered will be encrypted.
B.Only the enable password will be encrypted.
C.Only the enable secret password will be encrypted
D.It will encrypt the secret password and remove the enable secret password from the configuration.
E.It will encrypt all current and future passwords.

5.多项选择题Tracert功能是()。

A.用于检查网管工作是否正常
B.用于检查网络连接是否可通
C.用于分析网络在哪里出现了问题

6.单项选择题What is the function of the command switchport trunk native vlan 999 on a Cisco Catalyst switch()。

A.It creates a VLAN 999 interface.
B.It designates VLAN 999 for untagged traffic.
C.It blocks VLAN 999 traffic from passing on the trunk.
D.It designates VLAN 999 as the default for all unknown tagged traffic.

7.多项选择题下面哪些选项是物理层的基本功能?()

A.在终端设备之间传送比特流
B.建立、维护虚电路,进行差错校验和流量控制
C.定义电压、接口、线缆标准、传输距离等特性

8.单项选择题IP地址190.233.27.13/16所在的网段地址是()。

A.190.0.0.0
B.190.233.0.0
C.190.233.27.0
D.190.233.27.1

9.单项选择题可路由协议的网络地址由哪两部分组成?()

A.网络地址和主机地址
B.主机地址和网络掩码
C.网络地址和网络掩码

10.单项选择题RFC文档是下面哪一个标准的工作文件?()

A.ISO
B.ITU
C.IETF
D.IEEE

最新试题

何时必须使用clock rate 命令配置路由器串行接口?()

题型:单项选择题

请参见图示。某用户想要查看当前的配置。图中所示为ipconfig/all 命令的输出。从此输出可以得到哪三项结论?()

题型:多项选择题

请参见图示。从主机X 发出的到主机Y 的tracert 命令已成功。下列哪一项正确地反映了追踪列表中显示的中间网络设备的顺序?()

题型:单项选择题

请参见图示。RouterB 已经过正确配置。RouterA 的以太网接口Fa0/0已使用如图所示的命令进行配置。但是,从RouterA 的Fa0/0接口无法成功ping 通RouterB 的Fa0/0接口。应在RouterA 上采取什么措施来解决此问题?()

题型:单项选择题

以下哪两种介质可提供高达1Gb/s 的带宽?()

题型:多项选择题

请参见图示。图中所示路由表所属的PC 已正确配置。IP 地址192.168.1.254属于哪一个网络设备或接口?()

题型:单项选择题

PC 无法连接到任何远程网站,无法ping 通其默认网关,也无法ping 通本地网段中工作正常的打印机。以下哪项操作可以确认此PC 上的TCP/IP 协议栈是否工作正常?()

题型:单项选择题

请参见图示。对于从主机A 向Web 服务器发出的网页请求,正确的目的套接字数字是什么?()

题型:单项选择题

下列哪些是私有IP 地址的地址范围?()

题型:多项选择题

请参见图示。网络中的主机A 正在向主机B 发送数据段。有关所交换的数据段的流量控制如图所示。下列关于此通信的陈述,哪两项是正确的?()

题型:多项选择题