A.127.0.0.1
B.172.16.0.1
C.192.168.0.5
D.223.0.0.1
E.224.0.0.5
F.254.255.255.255
您可能感兴趣的试卷
你可能感兴趣的试题
A.config myrouter
B.display myroter
C.sysname myrouter
Which of the following statements describe the network shown in the graphic?()
A.There are two broadcast domains in the network.
B.There are four broadcast domains in the network.
C.There are six broadcast domains in the network.
D.There are four collision domains in the network.
E.There are five collision domains in the network.
F.There are seven collision domains in the network.
A.IP地址
B.主机地址
C.网络地址
D.通配符
A.provides common view of entire topology
B.exchanges routing tables with neighbors
C.calculates shortest path
D.utilizes event-triggered updates
E.utilizes frequent periodic updates
A.8
B.12
C.20
D.24
A.SW1#show swithport port-security interface FastEthernet 0/12
B.SW1#show swithport port-secure interface FastEthernet 0/12
C.SW1#show port-secure interface FastEthernet 0/12
D.SW1#show running-config
A.dialer
B.语音接口
C.serial口
D.子接口
E.CE1/PRI接口
F.虚拟接口模板
G.ISDNBRI接口
H.备份中心逻辑通道
A.Switches are primarily software based while bridges are hardware based.
B.Both bridges and switches forward Layer 2 broadcasts.
C.Bridges are frequently faster than switches.
D.Switches have a higher number of ports than most bridges.
E.Bridges define broadcast domains while switches define collision domains.
F.Both bridges and switches make forwarding decisions based on Layer 2 addresses.
A.255.255.255.0
B.255.255.255.240
C.255.255.255.248
D.255.255.255.252
E.255.255.255.254
最新试题
请参见图示。一台路由器(其路由表如图所示)收到发往192.168.1.4的数据包。路由器将如何处理该数据包?()
请参见图示。当计算机A 向计算机D 发送帧时,哪些计算机会接收该帧?()
以下哪两种介质可提供高达1Gb/s 的带宽?()
何时必须使用clock rate 命令配置路由器串行接口?()
下列哪些是私有IP 地址的地址范围?()
请参见图示。网络中的所有设备均使用默认配置。此拓扑中需要多少个逻辑地址范围?()
请参见图示。一台主机正使用NAT 连接到Internet。下列哪三项IP 地址可实现此连接?()
请参见图示。主机A 尝试与主机C 建立TCP/IP 会话。在尝试期间,路由器Y 的FastEthernet 接口fa0/1捕获到一个帧。捕获的帧中包含源IP 地址为172.16.1.5而目的IP 地址为172.16.7.24的数据包。捕获该帧时,它的源MAC 地址是什么?()
要将数据包发送到远程网络,应使用哪种设备?()
在配置路由器时,网络技术人员想要命名路由器。输入hostname 命令后,技术人员会看到下列哪一项提示?()