单项选择题assuming the default switch configuration which vlan range can be added modified and removed on a ciscoswitch?()

A.2 through 1001
B.1 through 1001
C.1  through 1002
D.2 through 1005


您可能感兴趣的试卷

你可能感兴趣的试题

1.单项选择题Which option is a valid IPv6 address?()

A.2001:0000:130F::099a::12a
B.2002:7654:A1AD:61:81AF:CCC1
C.FEC0:ABCD:WXYZ:0067::2A4
D.2004:1:25A4:886F::1

2.单项选择题which command is used to enable CHAP authentication whit PAP as the fallback method on a serialinterface?()

A.(config-if)#authentication ppp chap fallback ppp
B.(config-if)#authentication ppp chap pap
C.(config-if)#ppp authentication  chap pap
D.(config-if)#ppp authentication  chap fallback ppp

3.多项选择题下列哪些属于安全组织()

A.SANS
B.Cisco
C.CERT
D.ISC

4.单项选择题R1 forwards a packet from Host 1 to remote Server 1. Which statement describes the use of a MAC as the frame carrying this packet leaves the s0/0/0 interface of R1()。

A.The frame does not have MAC addresses.
B.The source MAC address in the frame is the MAC address of the NIC of Host 1.
C.The source MAC address in the frame is the MAC address of the s0/0/0 interface of R1.
D.The destination MAC address in the frame is the MAC address of the NICof server 1.
E.The destination MAC address in the frame is the MAC address of the s0/0/0 interface of R2

5.单项选择题What is known as "one-to-nearest" addressing in IPv6?()

A.global unicast
B.anycast
C.multicast
D.unspecified address

6.单项选择题Which type of cable is used to connect the COM port of a host to the COM port of a router or switch?()

A.crossover
B.straight-through
C.rolled
D.shielded twisted-pair

7.单项选择题最早的网络安全工具是()

A.ACS
B.IPS
C.IDS
D.IPSec

8.单项选择题Which parameter or parameters are used to calculate OSPF cost in cisco routers?()

A.Bandwidth,Delay,and MTUB
B.andwidth
C.Bandwidth and MTU
D.Bandwidth,MTU,Reliability,Delay,and Load

9.单项选择题Which Cisco Catalyst feature automatically disables the port in an operational PortFast upon receipt of a BPDU?()

A.BackboneFast
B.UplinkFast
C.Root Guard
D.BPDU Guard
E.BPDU Filter

10.单项选择题Host 1 receives a file from remote server 1. Which MAC address appears as the source address in the header of the frames received by Host 1()。

A.The MAC address of the NIC in Host 1
B.The MAC address of the NIC in server 1
C.The MAC address of the Fa0/0 interface of router R1
D.The MAC address of the s0/0/0 interface of the router R2

最新试题

请参见图示。主机A 正在访问多台服务器。结合使用什么端口号和地址即可唯一识别特定服务器上运行的特定进程?()

题型:单项选择题

请参见图示。在网络中,PC1向PC2发送了一条消息。PC2收到的帧如图所示。该帧中的哪一信息确定了正确的目的应用程序?()

题型:单项选择题

请参见图示。电缆1和电缆2分别按照特定的物理层要求接线。哪三个网段使用电缆2?()

题型:多项选择题

请参见图示。哪种逻辑拓扑是对图示网络的准确描述?()

题型:单项选择题

请参见图示。RouterB 已经过正确配置。RouterA 的以太网接口Fa0/0已使用如图所示的命令进行配置。但是,从RouterA 的Fa0/0接口无法成功ping 通RouterB 的Fa0/0接口。应在RouterA 上采取什么措施来解决此问题?()

题型:单项选择题

请参见图示。网络技术人员试图确定主机A 的正确IP 地址配置。以下哪一项是主机A 的有效配置?()

题型:单项选择题

PC 无法连接到任何远程网站,无法ping 通其默认网关,也无法ping 通本地网段中工作正常的打印机。以下哪项操作可以确认此PC 上的TCP/IP 协议栈是否工作正常?()

题型:单项选择题

请参见图示。一台路由器(其路由表如图所示)收到发往192.168.1.4的数据包。路由器将如何处理该数据包?()

题型:单项选择题

何时必须使用clock rate 命令配置路由器串行接口?()

题型:单项选择题

请参见图示。已启用路由器的NAT 功能供PC 访问Internet。可以为路由器接口S0/0/0分配下列哪一个IP 地址?()

题型:单项选择题