A.Frame Relay
B.HDLC
C.x.25
D.PPP
您可能感兴趣的试卷
你可能感兴趣的试题
A.120
B.100
C.90
D.110
A. the OSPF route
B. the EIGRP route
C. the RIPv2 route
D. all three routes
E. the OSPF and RIPv2 routes
A.enbale password c1sco
B.secret enable c1sco
C.password enable c1sco
D.enable secret c1sco
A.FF02::A
B.FF05::101
C.FF02::9
D.FF02::6
A.An IPv6 address is 64 b long and is represented as hexadecimal characters.
B.An IPv6 address is 32 b long and is represented as decimal digits.
C.An IPv6 address is 128 b long and is represented as decimal digits.
D.An IPv6 address is 128 b long and is represented as hexadecimal characters.
When upgrading the IOS image, the network administrator receives the exhibited error messagE.What could be the cause of this error?()
A.The new IOS image is too large for the router flash memory.
B.The TFTP server is unreachable from the router.
C.The new IOS image is not correct for this router platform.
D.The IOS image on the TFTP server is corrupt.
E.There is not enough disk space on the TFTP server for the IOS image.
A.Automatic summarization at classful boundries can cause problems on discontinuous subnets
B.EIGRP and OSPF are classful routing protocols and summarize routes by default
C.RIPv1 and OSPF are classless routing protocols
D.Classful routing protocols send the subnet mask in routing updates
A.to uniquely identify devices at Layer 2
B.to allow communication with devices on a different network
C.to differentiate a Layer 2 frame from a Layer 3 packet
D.to establish a priority system to determine which device gets to transmit first
E.to allow communication between different devices on the same network
F.to allow detection of a remote device when its physical address is unknown
A. It converges quickly.
B. OSPF is a classful routing protocol.
C. It uses cost to determine the best route.
D. It uses the DUAL algorithm to determine the best route.
E. OSPF routers send the complete routing table to all directly attached routers.
F. OSPF routers discover neighbors before exchanging routing information.
A.Cisco IOS IPsec/SSL VPN client
B.Cisco VPN Clinet
C.ISDN terminal adapter
D.Cisco Adaptive Security Appliance
最新试题
请参见图示。网络中的所有设备均使用默认配置。此拓扑中需要多少个逻辑地址范围?()
请参见图示。在网络中,PC1向PC2发送了一条消息。PC2收到的帧如图所示。该帧中的哪一信息确定了正确的目的应用程序?()
请参见图示。主机B 尝试与主机C 建立TCP/IP 会话。在尝试期间,San Francisco 器由器的FastEthernet 接口fa0/1捕获到一个帧。捕获的帧中包含源IP 地址为10.10.1.2而目的IP 地址为10.31.1.20的数据包。捕获该帧时,它的目的MAC 地址是什么?()
何时必须使用clock rate 命令配置路由器串行接口?()
请参见图示。主机A 和B 无法互相通信。此问题的原因是什么?()
请参见图示。主机A 正在访问多台服务器。结合使用什么端口号和地址即可唯一识别特定服务器上运行的特定进程?()
请参见图示。网络中的主机A 正在向主机B 发送数据段。有关所交换的数据段的流量控制如图所示。下列关于此通信的陈述,哪两项是正确的?()
传输层如何让主机能同时针对不同应用程序维护多个通信流?()
请参见图示。当计算机A 向计算机D 发送帧时,哪些计算机会接收该帧?()
请参见图示。从主机X 发出的到主机Y 的tracert 命令已成功。下列哪一项正确地反映了追踪列表中显示的中间网络设备的顺序?()