A.CSU/ DSU用于端接本地数字环路
B.调制解调器端接本地数字环路
C.一个CSU/ DSU终止模拟本地环路
D.调制解调器终止模拟本地环路
E.路由器通常被视为DTE设备
F.路由器通常被视为DCE设备
您可能感兴趣的试卷
你可能感兴趣的试题
A.传输
B.网络
C.表示
D.会话
E.应用
A.Configure port Fa0/1 to accept connections only from the static IP address of the server.
B.Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C.Configure the MAC address of the server as a static entry associated with port Fa0/1.
D.Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E.Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F.Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
A.172.22.243.127
B.172.22.243.191
C.172.22.243.190
D.10.16.33.98
E.10.17.64.34
F.192.168.1.160
请参见图示。哪三种说法正确描述了网络设备A?()
A.使用255.255.255.128子网掩码时,在各接口不需要的IP地址。
B.使用255.255.255.128子网掩码时,在各接口确实需要一个唯一的IP地址IP子网。
C.为255.255.255.0的子网掩码时,必须是一个二层设备的电脑进行通信彼此。
D.为255.255.255.0的子网掩码时,必须是一个三层设备的电脑进行通信彼此。
E.使用255.255.254.0的子网掩码时,每个接口并不需要一个IP地址。
A.6to4 tunneling
B.VPN tunneling
C.GRE tunneling
D.ISATAP tunneling
E.PPP tunneling
F.Teredo tunneling
A.The network administrator can apply port security to dynamic access ports
B.The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C.The sticky learning feature allows the addition of dynamically learned addresses to the running configuration.
D.The network administrator can apply port security to EtherChannels.
E.When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.
Which series of commands will configure router R1 for LAN-to-LAN communication with router R2? The enterprise network address is 192.1.1.0/24 and the routing protocol in use is RIP.()
A.R1(config)# interface ethernet 0;R1(config-if)# ip address 192.1.1.129 255.255.255.192;R1(config-if)# no shutdown
B.R1(config)# interface ethernet 0;R1(config-if)# ip address 192.1.1.97 255.255.255.192;R1(config-if)# no shutdown
C.R1(config)# interface serial 0;R1(config-if)# ip address 192.1.1.4 255.255.255.252;R1(config-if)# clock rate 56000
D.R1(config)# interface serial 0;R1(config-if)# ip address 192.1.1.6 255.255.255.252;R1(config-if)# no shutdown
E.R1(config)# router rip;R1(config-router)# network 192.1.1.4;R1(config-router)# network 192.1.1.128
F.R1(config)# router rip;R1(config-router)# version 2;R1(config-router)# network 192.1.1.0
请参见图示。当收到下列帧将会怎么做?()
A.Router1的将剥离的源MAC地址,并将其与MAC地址0000.0c36.6965取代。
B.Router1的将剥离的源IP地址,并将其与IP地址192.168.40.1取代。
C.router1将剥离的目的MAC地址,并将其与MAC地址代替0000.0c07.4320。
D.router1将剥离的目的IP地址,并将其与192.168.40.1的IP地址替换。
E.Router1的将转发数据包输出接口的FastEthernet0/1。
F.router1将转发数据包输出接口的FastEthernet0/2。
A.4to6 routing
B.6to4 routing
C.binary routing
D.dual-stack routing
E.NextGen routing
A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates
最新试题
请参见图示。从主机X 发出的到主机Y 的tracert 命令已成功。下列哪一项正确地反映了追踪列表中显示的中间网络设备的顺序?()
请参见图示。电缆1和电缆2分别按照特定的物理层要求接线。哪三个网段使用电缆2?()
请参见图示。网络中的所有设备均使用默认配置。此拓扑中存在多少个广播域?()
下列哪些是私有IP 地址的地址范围?()
请参见图示。公司路由器由于故障被更换。更换路由器之后,Education 办公室内的主机C 和D 能够相互ping 通,但是无法访问Accounts 办公室内的主机。此问题的原因可能是什么?()
请参见图示。某用户想要查看当前的配置。图中所示为ipconfig/all 命令的输出。从此输出可以得到哪三项结论?()
请参见图示。哪种逻辑拓扑是对图示网络的准确描述?()
在路由器上使用Router#copy running-config startup-config 命令会产生什么效果?()
请参见图示。主机A 和B 无法互相通信。此问题的原因是什么?()
传输层如何让主机能同时针对不同应用程序维护多个通信流?()