A.configure static frame relay map entries for each subinterface network.
B.remove the ip address from the physical interface
C.create the virtual interfaces with the interface command
D.configure each subinterface with its own IP address
E.disable split horizon to prevent routing loops between the subinterface networks
F.encapsulate the physical interface with multipoint PPP
您可能感兴趣的试卷
你可能感兴趣的试题
A.传输层把一个数据流分成段,并可以增加可靠性和流控制信息。
B.数据链路层增加物理源和目的地地址以及一个FCS字段。
C.当网络层封装源和目的地主机的地址和协议相关的控制信息的帧分组被创建。
D.当网络层增加了第3层的地址和控制信息,以一个段分组被创建。
E.表示层转换位成电压为通过物理链路传输。
A.会话
B.网络
C.物理
D.数据链路
E.传输
A.Erase flash.
B.Restart the switch.
C.Delete the VLAN database.
D.Erase the running configuration.
E.Erase the startup configuration.
F.Modify the configuration register.
A.这是一个为10Mb / s交换机端口。
B.这是一个的100Mbs交换机端口。
C.这是一个以太网端口工作在半双工模式。
D.这是一个以太网端口工作在全双工模式。
E.这是在一台PC的网络接口卡的端口。
A.VTP allows routing between VLANs.
B.VTP allows a single switch port to carry information to more than one VLAN.
C.VTP allows physically redundant links while preventing switching loops.
D.VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.
E.VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.
F.VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.
A.::
B.::192:168:0:1
C.2000::
D.2001:3452:4952:2837::
E.2002:c0a8:101::42
F.2003:dead:beef:4dad:23:46:bb:101
A.SMTP
B.Telnet
C.FTP
D.DNS
A.应用
B.表示
C.会话
D.传输
E.网络
F.数据链路
A.RIP is an example of distance vector routing protocols
B.Updates are periodic and include the entire routing table
C.Routing updates are sent only after topology changes
D.The protocol can be useful in hub-and-spoke and hierarchical networks
E.Convergence is usually faster than with link state protocols
F.Each router has its own view of the topology
A.to make VTP easier to implement
B.to isolate broadcast traffic
C.to increase the size of the collision domain
D.to allow more devices to connect to the network
E.to logically group hosts according to function
F.to increase network security
最新试题
在Cisco IOS 设备中,启动配置文件存储于何处?()
要将数据包发送到远程网络,应使用哪种设备?()
在路由器上使用Router#copy running-config startup-config 命令会产生什么效果?()
路由器使用哪一项信息来确定源主机和目的主机之间的路径?()
请参见图示。已启用路由器的NAT 功能供PC 访问Internet。可以为路由器接口S0/0/0分配下列哪一个IP 地址?()
请参见图示。一台路由器(其路由表如图所示)收到发往192.168.1.4的数据包。路由器将如何处理该数据包?()
请参见图示。下列哪组设备仅包含中间设备?()
以下哪两种介质可提供高达1Gb/s 的带宽?()
请参见图示。网络中的所有设备均使用默认配置。此拓扑中需要多少个逻辑地址范围?()
何时必须使用clock rate 命令配置路由器串行接口?()