A.It requires OSPF version 3.
B.automatically detects neighbors over NHMA interfaces
C.It supports encryption using
D.It uses LSA type 9
E.It uses LSA type 8
您可能感兴趣的试卷
你可能感兴趣的试题
A.MPLS is enabled on the core, distribution, and edge devices.
B.A triple stack is enabled on PE devices.
C.The network has at least six PE devices.
D.A dual stack is enabled on all the P and PE devices in a network.
A.CBWFQ
B.CB-WRED
C.LLQ
D.Custom Queueing
E.WRR Queueing
A.6PE feature is supported over tunnels other than RSVP-TE tunnels
B.Core MPLS routers are supporting IPv6 ONLY
C.6PE feature is not supported over tunnels other than RSVP-TE tunnels
D.Core MPLS routers are supporting IPv4 only
A.1
B.None
C.3
D.2
E.It depends on the numbers of hops between the ingress and egress PE
A.Network management layer
B.Element management layer
C.Business management layer
D.Network element layer
A.The MDT group address should be the same for both address families in the same VRF
B.The MDT group address should be the same for both address families in the different VRFs
C.Configuration of the MDT source on a pre-VRF basis is supported only on IPv6
D.The MDT group address should be different for both address families in the same VRF
A.interface Ethernet0/0 I.pv6 traffic-filter NoULA out I.pv6 access-list NoULA Deny ipv6 FC00::/8 any Permit ipv6 any any
B.interface Ethernet0/0 I.pv6 traffic-filter NoULA out I.pv6 access-list NoULA Deny ipv6 FC00::/7 anyP ermit ipv8 any any
C.interface Ethernet0/0 I.pv6 access-group NoULA out I.pv6 access-list NoULA Deny ipv6 FC00::/8 anyP ermit ipv6 any any
D.interface Ethernet0/0 I.pv6 access-group NoULA out I.pv6 access-list NoULA Deny ipv6 FC00::/7 any Permit ipv6 any any
A.The virtual routing and forwarding table is separate from the global routing table that exists on PE routers. Routes are injected into the VRF from the CE-PE routing protocols for that VRF and any MP-BGP announcements that match the defined VRF RTs
B.Multiprotocol Border Gateway Protocol is run between PE and CE routers to exchange customer prefixes in a VPNv4 format
C.A customer edge router peers at Layer 3 to the provider edge. The PE-CE interface runs either a dynamic routing protocol (eBGP, RIPv2, EIGRP, OSPF) or a static routing protocol (Static, Connected)
D.VPNv4 address is the combination of the RT and customer IPv4 prefix. These VPNv4 prefixes are passed in MP-BGP
A.Routing information received through an IBGP session is not forwarded to another IBGP neighbor, onlyto EBGP neighbors
B.Routing information received through an EBGP session is not forwarded to another EBGP neighbor,only to IBGP neighbors
C.BGP neighbor peerings are established and sychronized using the TCP 3-way handshake
D.BGP shall not advertise a route until that route has been learned via an IGP also
A.CSNP
B.LSP
C.ISH
D.Hello
E.IIH
F.PSNP
最新试题
Which configuration prevents traffic that is sourced from the unique local address scope to be sent out ofthe link to the upstream service provider?()
Cisco IOS XR Software Multicast Routing Implementation, which three features are supported in IPv6 onCisco CRS router?()
Which tree of these are types of Ethernet Virtue Connections (EVCs) in the MEF concept?()
What layer of the TMN (telecommunications management network) model does CTM fit into?()
Which three protocols use TLVs to carry attributes?()
Which two requirements to deploy 6PE and 6VPE solutions are mandatory?()
Which two routers support cable access?()
Which statement about multicast VPN is true?()
What is the BGP synchronization rule?()
Which option is not a valid method to assign the lowest-order 64-bit field of an IPv6 unicast address?()