A.Reverse Path Forwarding
B.Hardware-based forwarding
C.UDP forwarding
D.Layer 2 Forwarding
您可能感兴趣的试卷
你可能感兴趣的试题
A.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode ON
B.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode to OFF
C.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode asauto.
D.The firewall does not support DTP. You should set the switchport trunk mode to ON
A.0.0.0.1
B.0.255.0.1
C.2001:DB8::1
D.2001:DB8:ABCD:FEEF::1
A.excessive collisions
B.FCS errors
C.runts
D.late collisions
A.BPDUs that enter a blocking port are discarded.
B.BPDUs that enter a blocking port are processed.
C.Loopguard puts an interface into a loop-inconsistent state when BPDUs stop being received on a blocking port.
D.BPDUs are only processed on forwarding ports.
A.The CBWFQ scheduler provides a guaranteed minimum amount of bandwidth to each class.
B.CBWFQ services each class queue using a strict priority scheduler.
C.The class-default queue only supports WFQ.
D.Inside a class queue, processing is always FIFO, except for the class-default queue.
A.It is a function used by routing protocols to install routes into routing table
B.It is a function that prevents the advertising of routes over an interface that the router is usingto reach a route
C.Its function is to help avoid routing loops.
D.It is a redistribution technique used by routing protocols
A.An update packet with init flag set from a known, already established neighbor relationship was received by one of the routers.
B.The counters were deleted.
C.The ARP cache was removed.
D.The IP EIGRP neighbor relationship was cleared manually.
A.Area 0
B.NSSA
C.Totally stubby
D.Stub
A.Set the NHRP hold time to match the EIGRP hold time
B.Add the enable eigrp stub command
C.Add the disable eigrp as-member split-horizon command
D.Add the disable eigrp as-member next-hop-self command
A.NBAR provides the ability to configure MCQ; it is a mandatory MCQ component.
B.NBAR provides deep packet inspection and is used for advanced packet classification.
C.NBAR provides per-protocol packet and byte accounting functionality; it is used to track bandwidth utilization for all protocols described in the loaded PDLMs.
D.NBAR provides scheduling in an MQC policy map using an advanced algorithm.
最新试题
f a Cisco switch is configured with VTPv1 in transparent mode, what is done with received VTP advertisements?()
Which statement is correct about an OSPF sham-link?()
Which switch port error is an indication of duplex mismatches on 10/100/1000 IEEE 802.3u Gigabit Ethernet ports?()
Which three protocols should be explicitly managed by using Control Plane Policing on an Internet border router?()
Choose two commands that are required to enable multicast on a router, when it is known that the receivers use a specific functionality of IGMPv3.()
When a BGP router is not capable of understanding 4-byte AS numbers, it will see 4-byte AS numbers as a special, reserved, 2-byte AS number in the AS path. Which 2-byte AS number is this reserved one?()
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message (knowing that the MSDP router is also configured as an RP for the PIM domain)?()
For the following items,what is the mathematical relationship between the committed information rate (CIR), committed burst (Bc), and committed rate measurement interval (Tc)?()
Which QoS mechanism can help classify different kinds of Citrix traffic (print job versus real-time terminal control)?()
Which two attributes need to match for two switches to become members of the same MST region? ()