A.show ip route ∣ to tftp：//192.168.1.1/route.txt
B.show ip route ∣ tee tftp：//192.168.1.1/route.txt
C.show ip route ∣ include tftp：//192.168.1.1/route.txt
D.show ip route ft include tJtp：//19Z168.1.1/route.txt
E.show ip route ∣ redirect tftp：//192.168.1.1/route.txt
您可能感兴趣的试卷
你可能感兴趣的试题
A.Link-local address used for next-hop addresses
B.Interface can be added to RIP routing process in either interface configuration mode or in routerconfiguration mode
C.Uses a multicast to send routing updates
D.Use hop count as a metric
E.Distance-vector routing protocol
F.Maximum hop count is 15 with 16 being "unreachable"
A.The default-metric command configured under the appropriate interface
B.The metric parameter in the network command of a routing process
C.The metric parameter in the redistribute command
D.The default-metric command
E.A route-map containing a seed command
F.A route map containing a metric command
A.Designated port
B.Nonswitch port
C.Switch port
D.Nonroot port
E.Nondesignated port
F.Root port
A.show ip eigrp topology
B.show ip eigrp adjacency
C.show ip eigrp routes
D.show ip eigrp database
E.show ip route eigrp
F.show ip eigrp forwarding
A.255.255.255.255
B.224.0.0.6
C.FFFF：FFFF：FFFF：FFFF：FFFF：FFFF：FFF：FFF
D.FF02：：10
E.224.0.0.10
F.FF02：：5
A.Rl（config-if）#ipv6 default-information originate
B.Rl（config-router）#ipv6 rip 〈process-name〉 default-information only
C.Rl（config）#ipv6 route ：：/0 null 0
D.Rl（config-if）#ipv6 rip 〈process-name〉 default-information only
E.Rl（config-router）#ipv6 rip route ；：/0 originate
F.Rl（config-router）#aggregate-address ：：/0 summarize-routes
A.Ping 10.1.1.1 Data Pattern M
B.Ping 10.1.1.1 timeout 0
C.Ping 10.1.1.1 size 1500 df-bit
D.Ping 10.1.1.1 source loopback 0
E.Ping 10.1.1.1 size 1500
F.Ping 10.1.1.1 size 1500 Strict
A.RIP route 10.1.2.0/24
B.EIGRP route 10.1.2.0/24
C.RIP route 10.1.0.0/16
D.OSPF route 10.1.0.0/16
E.RIP route 10.0.0.0/16
F.OSPF route 10.1.2.0/24
A.OSPF topology table
B.OSPF interface table
C.OSPF routing information base
D.OSPF link-state database
E.OSPF adjacency table
F.OSPF neighbor table
A.Problem report
B.Problem collaboration
C.Problem diagnosis
D.Problem resolution
E.Problem documentation
F.Probiem authentication
最新试题
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
Drag each element of the Cisco IOS Firewall Feature Set from the above and drop onto itsdescription on the below.
Drag and drop question. The upper gives the MPLS functions， the bottom describes the planes.Drag the above items to the proper location at the below
A new router was configured with the following commands：The configuration above was found on an Internet Service Provider’s （ISP） Multiprotocol LabelSwitching （MPLS） network. What is its purpose？（）
In computer security， AAA stands for authentication， authorization and accounting. Which optionabout the AAA authentication enable default group radius enable command is correct？（）
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.（Not allstatements will be used）
As a network engineer， do you know for what purpose SDM uses Security Device Event Exchange（SDEE）？（）
Study the exhibit carefully. The Cisco IOS IPsec High Availability （IPsec HA） Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is， Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec？（）
Which two encapsulation methods require that an 827 ADSL router be configured with a PPPusername and CHAP password？（）
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true？（）