You have a server that runs Windows Server 2003 Service Pack 2 (SP2).
You need to identify all the unsigned drivers that are installed on the server.
What should you do? ()
A. Run Chkdsk.exe.
B. Run Sigverif.exe.
C. Review %systemroot%\repair\setup.log.
D. Open Device Manager and review all the devices that contain a warning.
您可能感兴趣的试卷
你可能感兴趣的试题
You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).
You run a full backup of Server1, update the device driver for the network adapter, and then restart
Server1.
You log on to Server1 and receive an error message that the network adapter driver failed to load.
You need to ensure that the network adapter driver starts. You must achieve this goal in the minimum
amount of time.
What should you do? ()
A. Use the Roll Back Driver option.
B. Use Windows Backup to restore the system state.
C. Restart the server and select the Safe Mode option.
D. Restart the server and select the Last Known Good Configuration option.
You have a file server named Server1 that runs Windows Server 2003 Service Pack (SP2).
Server1 has a 10-gigabit network adapter and is connected to a 100-Mb switch.
You replace the 100-Mb switch by using a 1-GB switch.
You discover that copying files to Server1 over the network is slow.
You need to reduce the amount of time it takes to copy files to Server1 over the network.
Which connection type should you specify for the network adapter? ()
A. 1-gigabit half-duplex
B. 1-gigabit full-duplex
C. 10-gigabit half-duplex
D. 10-gigabit full-duplex
You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack
(SP2).
You connect a USB drive to Server1 and copy several files to the USB drive.
You connect the USB drive to Server2. You receive a message that the drive installed successful and is
ready-to-use.
You open Windows Explorer and the USB drive does not appear.
You need to ensure that you can access the files stored on the USB drive.
What should you do? ()
A. From the command prompt, run Convert.exe.
B. From the Disk Management snap-in, change the drive letter.
C. From the Services snap-in, restart the Removable Storage service.
D. From the Device Manager snap-in, scan for a hardware change.
You have a server that runs Windows Server 2003 Service Pack 2 (SP2) and is configured as a
domain controller.
You run Windows Update and install a number of device drivers.
You restart the server. During the startup process, the server stops.
You receive the following stop error message: “0x000000D1 (0x0000000c, 0x00000002, 0x00000000,
0xf27b4e8e) IRQL_NOT_LESS_OR_EQUAL.”
You need to identify which device or service is causing the error.
What should you do? ()
A. Restart the server by using the Safe Mode option. Review the contents of the ntbtlog.txt file.
B. Restart the server by using the Last Known Good Configuration option. Review the spupdsvc.log file.
C. Restart the server by using the Directory Services Restore Mode option. Review the contents of the ntdtcsetup.log file.
D. Restart the server by using the Safe Mode with Networking option. Review the contents of the WindowsUpdate.log file.
You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1
runs a custom database application. The database files are stored on drive D.
Server1 experiences a power failure. Upon restart, the database engine reports that the log files fail to
replay because a log file is corrupt.
You need to minimize the risk of a log file becoming corrupt if the power fails.
What should you do? ()
A. Enable hibernation.
B. Enable volume shadow copies.
C. Disable read caching on drive.
D. Disable write caching on drive.
You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1
has one basic disk that contains one partition.
You monitor the PhysicalDisk : Avg. Disk Bytes/Read counter for one year and discover that the value has
decreased by 25 percent.
You need to increase the disk performance of Server1.
What should you do? ()
A. Compress the volume.
B. Defragment the volume.
C. Convert the disk to a dynamic disk.
D. Enable Shadow Copies on the volume.
You have a print server named Server1 that runs Windows Server 2003 Service Pack (SP2). Server1
is configured as shown in the following table.
All the hard disks are 136 GB and are connected to a SCSI controller.
You need to identify which disk configuration will provide the best performance for printing.
Which disk configuration should you implement?()
A. one RAID-0 volume
B. one RAID-1 volume
C. one RAID-5 volume
D. two RAID-1 volumes
Your network contains an application server named Server1 that runs Windows Server 2003 Service
Pack (SP2).
You open the Performance tab in Task Manager as shown in the exhibit. (Click the Exhibit button.)
You need to improve the performance of Server1.
What should you do? ()
A. Install additional RAM.
B. Install a second processor.
C. Decrease the size of the paging file.
D. Add the /PAE switch to the Boot.ini file.
Your network contains a database server that runs Windows Server 2003 Standard Edition Service
Pack 2 (SP2). The server has 1 GB of RAM and a single hard disk.
Queries against the databases on the server are very slow. You discover that the hard disk on the server
is very active.
You are evaluating whether to add RAM to the server.
You need to use System Monitor to find out whether adding RAM will decrease disk activity.
Which performance counter should you monitor? ()
A. LogicalDisk : % Free Space
B. Memory : Pages Faults/sec
C. Memory : Free System Page Table Entries
D. Server Work Queues : Queue Length
Your network contains a server named Server1 that runs Windows Server 2003 Service Pack (SP2).
You install a new network adapter on Server1.
You need to view the media access control (MAC) address for the new network adapter.
What should you do? ()
A. At the command prompt, run Ipconfig /all.
B. At the command prompt, run Net view \\server1.
C. From the Device Manager snap-in, view the properties of the network adapter.
D. From the Services snap-in, view the properties on the Network Connections service.
最新试题
You are the domain administrator for TestKing's Active Directory domain. Allservers run Windows Server 2003. All client computers run Windows XPProfessional.A newly installed server was added to your domain. You need to administer thisserver remotely from your client computer.You need to configure the new server to ensure that it can be administeredremotely.What should you do?()
You are the network administrator for TestKing. The network consists of a singleActive Directory domain. All network servers run Windows Server 2003 and allclient computers run Windows XP Professional.Terminal Services is installed on a member server named Testking1. Currently, 30active terminal server sessions are connected to Testking1. An unforeseen hardwareupgrade will require shutting down the server.You need to provide a two-minute warning about the shutdown to all activeterminal sessions.First, you log on to Testking1 as an administrator.What should you do next?()
You are the network administrator for All network severs runWindows Server 2003. Business hours are 9:00 A.M. to 5:00 P.M., Monday throughFridayA file server named TestKingB is configured to create a shadow copy every morningat 1:00 A.M. TestKingB hosts several shared folders. One shared folder has theconfiguration shown in the following table.For several months, users frequently access both databases in TestKingOrders. OneMonday morning, a user tells you that she needs to edit Receivables.mdb as itexisted at 5:00 P.M. on the previous Thursday.You need to modify TestKingB to enable the appropriate editing. You must ensurethat other users can continue to access current data without interruption.First, you map a drive to \\TestKingB\TestKingOrders.Which two additional actions should you perform? ()(Each correct answer presentspart of the solution. Choose two)
You are the network administrator for Active Directory domain. Thedomain includes Windows Server 2003 domain controllers and Windows XPProfessional client computers.A new administrator named Sandra is hired to assist you in deploying Windows XPProfessional to 100 new computers. Sandra installs the operating system on a newcomputer named TestKing11.However, when Sandra tries to log on to the domain from TestKing11, she isunsuccessful. The logon dialog box does now allow her to view and select the domainname.You need to ensure that Sandra can log on to the domain from TestKing11.What should you do?()
You are the network administrator for TestKing. The network consists of a singleActive Directory domain. All network servers run Windows Server 2003. Half of theclient computers run Windows XP Professional, and the other half run WindowsNT 4.0 Workstation.You install Terminal Services on three member servers named Testking1,Testking2, and Testking3. Each server has a single Pentium III 600-Mhz CPU with512 MB of RAM and a single-channel EIDE disk subsystem. You place all threeterminal servers in an organizational unit (OU) named Terminal Server. You link aGroup Policy Object (GPO) to the Terminal Server OU.Several days after the installation, users report that the performance of all threeterminal servers is unacceptably slow. You discover that each server has at least 50active sessions at once.You need to improve the performance of all three terminal servers. You mustachieve this goal by using the minimum amount of administrative effort, withoutupgrading any hardware.What should you do?()
You are the administrator of a Windows Server 2003 computer named Testking1.Backups of the System State data of Testking1 occur each day by using the localAdministrator account.A new requirement restricts you from running services by using theAdministrator account. To meet the requirement, you create a new service accountnamed BackupTestking1 to be used for backups. You want this account to have theminimum permissions necessary to perform backups.You need to grant the appropriate permissions to the BackupTestking1 account andto configure the backup job to use the BackupTestking1 account.What should you do?()
You are the network administrator for TestKing. Your network consists of a singleActive Directory domain. You manage a Terminal Server farm that includes fiveterminal servers and a Terminal Services Licensing server named testking9. Allservers run Windows 2000 Server. There are 2,500 users who log on to the terminalservers to access a custom human resource (HR) application.You install Windows Server 2003 on a new server named testking10. Testking10 isconfigured with all default settings enabled. You install Terminal Services and theHR application on testking10. You instruct some users to access the HR applicationon testking10.Four months later, users report that they can no longer establish Terminal Servicessessions to testking10. You verify that users can connect to the other terminalservers in your Terminal Server farm.You need to ensure that users can run the HR application on all terminal servers onthe network.What should you do?()
You are the network administrator in the New York office of TestKing.The company network consists of a single Active Directory domain The New York office currently contains one Windows Server 2003 file server named TestKingA.All file servers in the New York office are in an organizational unit (OU) namedNew York Servers. You have been assigned the Allow - Change permission for aGroup Policy object (GPO) named NYServersGPO, which is linked to the NewYork Servers OU.The written company security policy states that all new servers must be configuredwith specified predefined security settings when the servers join the domain. Thesesettings differ slightly for the various company offices.You plan to install Windows Sever 2003, on 15 new computers, which all functionsas file servers. You will need to configure the specified security settings on the newfile servers.TestKingA currently has the specified security settings configured in its localsecurity policy. You need to ensure that the security configuration of the new fileservers is identical to that of TestKingA. You export a copy of TestKingA's localsecurity policy settings to a template file.You need to configure the security settings of the new servers, and you want to usethe minimum amount of administrative effort.What should you do?()
You are the network administrator for TestKing. The network contains a WindowsServer 2003 computer named Testking1.You back up the data folders on Testking1 by using the following schedule:1. Normal backup every Monday.2. Incremental backups every Tuesday, Wednesday, Thursday, and Friday.After the backup on Friday is completed, a user accidentally deletes a file from adata folder on Server1. The user reports that he modified the file in the past week,but he does not know which day he modified the file. You do not know when the filewas last backed up.You need to restore the latest copy of the file as quickly as possible.What should you do?()
You are the network administrator for TestKing. The network consists of a singleActive Directory domain. All network servers run Windows Server 2003.A member server named TestkingA has a locally attached tape device. TestkingAcontains several folders and files that are encrypted by using Encrypting FileSystem (EFS).You create a new user account for a new employee named Victoria. Victoria's useraccount is member of the Users group only.You need to ensure that Victoria can back up the encrypted folders and files onTestkingA. Victoria must be assigned the minimum administrative privilegesneeded to complete this task.What should you do?()