What is true about access control on bridged and routed VLAN traffic？ （）
A. Router ACLs can be applied to the input and output directions of a VLAN interface.
B. Bridged ACLs can be applied to the input and output directions of a VLAN interface.
C. Only router ACLs can be applied to a VLAN interface.
D. VLAN maps and router ACLs can be used in combination.
E. VLAN maps can be applied to a VLAN interface
您可能感兴趣的试卷
你可能感兴趣的试题
On a Company switch named R1 you configure the following： iparp inspection vlan 10-12， 15
What is the purpose of this global configuration command made on R1？（）
A. Discards ARP packets with invalid IP-to-MAC address bindings on trusted ports
B. Validates outgoing ARP requests for interfaces configured on VLAN 10， 11， 12， or 15
C. Intercepts， logs， and discards ARP packets with invalid IP-to-MAC address bindings
D. Intercepts all ARP requests and responses on trusted ports
E. None of the other alternatives apply
As the network technician at Company， you need to configure DHCP snooping on a new switch.
Which three steps are required？ （）
A. Configure the switch to insert and remove DHCP relay information （option-82 field） in forwarded DHCP request messages.
B. Configure DHCP snooping globally.
C. Configure the switch as a DHCP server.
D. Configure DHCP snooping on an interface.
E. Configure all interfaces as DHCP snooping trusted interfaces.
F. Configure DHCP snooping on a VLAN or range of VLANs.
In the use of 802.1X access control，
which three protocols are allowed through the switch port before authentication takes place？ （）
A. STP
B. CDP
C. EAP MD5
D. TACACS+
E. EAP-over-LAN
F. protocols not filtered by an ACL
The DAI feature has been implemented in the Company switched LAN.
Which three statements are true about the dynamic ARP inspection （DAI） feature？ （）
A. DAI can be performed on ingress ports only.
B. DAI can be performed on both ingress and egress ports.
C. DAI is supported on access ports， trunk ports， EtherChannel ports， and private VLAN ports.
D. DAI should be enabled on the root switch for particular VLANs only in order to secure the ARP caches of hosts in the domain.
E. DAI should be configured on all access switch ports as untrusted and on all switch ports connected to other switches as trusted.
F. DAI is supported on access and trunk ports only.
pany has implemented 802.1X authentication as a security enhancement.
Which statement is true about 802.1x port-based authentication？（）
A. TACACS+ is the only supported authentication server type.
B. If a host initiates the authentication process and does not receive a response， it assumes it is not authorized.
C. RADIUS is the only supported authentication server type.
D. Before transmitting data， an 802.1x host must determine the authorization state of the switch.
E. Hosts are required to havea 802.1x authentication client or utilize PPPoE.
F. None of the other alternatives apply.
Refer to the exhibit.
How will interface FastEthernnet0/1 respond when an 802.1x-enabled client connects to the port？ （）
A. The switch will uniquely authorize the client by using the client MAC address.
B. The switch will cause the port to remain in the unauthorized state， ignoring all attempts by the client to authenticate.
C. The switch port will disable 802.1x port-based authentication and cause the port to transition to the authorized state without any further authentication exchange.
D. The switch port will enable 802.1x port-based authentication and begin relaying authentication messages between the client and the authentication server.
An attacker is launching a DoS attack on the Company network using a hacking tool designed to exhaust the IP address space available from the DHCP servers for a period of time.
Which procedure would best defend against this type of attack？ （）
A. Configure only trusted interfaces with root guard.
B. Implement private VLANs （PVLANs） to carry only user traffic.
C. Implement private VLANs （PVLANs） to carry only DHCP traffic.
D. Configure only untrusted interfaces with root guard.
E. Configure DHCP spoofing on all ports that connect untrusted clients.
F. Configure DHCP snooping only on ports that connect trusted DHCP servers.
G. None of the other alternatives apply
The Company is concerned about Layer 2 security threats.
Which statement is true about these threats？ （）
A. MAC spoofing attacks allow an attacking device to receive frames intended for a different network host.
B. Port scanners are the most effective defense against dynamic ARP inspection.
C. MAC spoofing, in conjunction with ARP snooping, is the most effective counter-measure against reconnaissance attacks that use dynamic ARP inspection (DAI) to determine vulnerable attack points.
D. Dynamic ARP inspection in conjunction with ARP spoofing can be used to counter DHCP snooping attacks.
E. DHCP snooping sends unauthorized replies to DHCP queries.
F. ARP spoofing can be used to redirect traffic to counter dynamic ARP inspection.
G. None of the other alternatives apply.
Refer to the exhibit. Port security has been configured on the switch port Fa0/5.
What would happen if another device is connected to the port after the maximum number of devices has been reached， even if one or more of the original MAC addresses are inactive？（）
A. The port will permit the new MAC address because one or more of the original MAC addresses are inactive.
B. The port will permit the new MAC address because one or more of the original MAC addresses will age out.
C. Because the new MAC address is not configured on the port， the port will not permit the new MAC address.
D. Although one or more of the original MAC addresses are inactive， the port will not permit the new MAC address.
Refer to the exhibit.
What is the problem with this configuration？（）
A. Spanning tree PortFast cannot be configured on a port where a voice VLAN is configured.
B. Sticky secure MAC addresses cannot be used on a port when a voice VLAN is configured.
C. Spanning tree PortFast cannot be configured on a port when a sticky secure MAC address is used.
D. The switch port must be configured as a trunk.
最新试题
Refer to the exhibit and the partial configuration of switch SW_A and SW_B. STP is configured on all switches in the network. SW_B receives this error message on the console port：00：06：34： %CDP-4-DUPLEX_MISMATCH： duplex mismatch discovered on FastEthernet0/5 （not half duplex）， with SW_A FastEthernet0/4 （half duplex） ， with TBA05071417（Cat6K-B） 0/4 （half duplex）. What would be the possible outcome of the problem？（）
What must be the same to make multiple switches part of the same Multiple Spanning Tree （MST）？（）
How are STP timers and state transitions affected when a topology change occurs in an STP environment？（）
Based on the show spanning-tree vlan 200 output shown in the exhibit， which two statements about the STP process for VLAN 200 are true？ （）
Refer to the exhibit. On the basis of the output of the show spanning-tree inconsistentports command， which statement about interfaces FastEthernet 0/1 and FastEthernet 0/2 is true？（）
Refer to the exhibit. Initially， LinkA is connected and forwarding traffic. A new LinkB is then attached between SwitchA and HubA. Which two statements are true about the possible result of attaching the second link？（）
Which router redundancy protocol cannot be configured for interface tracking？（）
Which statement is correct about the use of the virtual interface on a WLC ？（）
Refer to the exhibit. Which Virtual Router Redundancy Protocol （VRRP） statement is true about the roles of the master virtual router and the backup virtual router？（）
Which three statements about STP timers are true？（）