You install three servers that run Windows Server 2003 Service Pack 2 (SP2). The servers are on the same subnet.You get the IP configuration for the servers as shown in the following table.
You need to ensure that you can establish communication between the three servers.
What should you do?()
A. Modify the IP address on Server3.
B. Modify the IP address on Server1.
C. Configure the hosts file on each server.
D. Modify the default gateway for each server.
您可能感兴趣的试卷
你可能感兴趣的试题
You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). The IP configuration for Server1 is shown in the following table. wwwwww. ..EEx xxaammk kki iinng ggs ss. ..c ccoomm
| English | Chinese(Traditional) | Chinese(Simplified) | - 13 - ExamKings Information Co., Ltd. All rights reserved.You replace the network card on Server1. You configure the new network card to use the existing IP configuration.Users reports that they receive a time-out error message when they connect to Server1.You need to ensure that users can immediately connect to Server1.
Which command should you instruct users to run? ()
A.Arp –d 172.16.90.13
B.Ipconfig /flushdns
C.Nbtstat –R
D.Netstat –r 172.16.90.13
Your network consists of a single Active Directory domain named nwtraders.com. All network servers run Windows Server 2003 Service Pack 2 (SP2).The relevant IP configuration for the network is configured as shown in the following table. DC1 contains an Active Directory-integrated zone for nwtraders.com.From Server2, you run the Ping 172.26.26.11 command and receive a request timed out error message. From Server2, you run the Ping 172.16.16.129 command and receive a reply. You need to ensure that you can join Server2 to the nwtraders.com domain.
What should you do?()
A.Set the IP address to 172.16.16.2.
B.Set the subnet mask to 255.255.255.128.
C.Set the default gateway address to 172.16.16.129.
D.Set the preferred DNS server address to 172.16.16.130.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2).You have a member server named Server1 that is configured as a DHCP server.You install a new stand-alone server named Server2 in the same subnet as Server1. You install the DHCP service on Server2.You need to ensure that Server2 can assign IP configurations to clients on the subnet.
What should you do first?()
A.Join Server2 to the domain.
B.Restart the DCHP Server service on Server1.
C.From the DHCP snap-in on Server1, add Server2 by using the Add Server option.
D.From the DHCP snap-in on Server2, add Server 1 by using the Add Server option.
Your network consists of a single Active Directory domain. You have a DHCP server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You have a computer named Computer1 that runs Windows XP Professional Service Pack 3 (SP3).You need to administer the DHCP service on Server1 from Computer1.
What should you do first?()
A.On Computer1, install adminpak.msi.
B.On Computer1, at a command prompt run the Netsh command.
C.On Server1, open the DHCP snap-in and select Export List.
D.On Server1, open the DHCP snap-in and add Computer1 to the list of servers.
A.In the DHCP snap-in, add a server option.
B.In the DHCP snap-in, add a scope option for each scope.
C.At a command prompt on the server, run the Chcp command and code page 863.
D.At a command prompt on the server, run the Netsh command and configure the popd subcontext.
Your company has two offices.All servers run Windows Server 2003 Service Pack 2 (SP2). The relevant portion of the network is configured as shown in the exhibit. (Click the Exhibit button.) wwwwww. ..EEx xxaammk kki iinng ggs ss. ..c ccoomm | English | Chinese(Traditional) | Chinese(Simplified) | - 8 - ExamKings Information Co., Ltd. All rights reserved.You need to ensure that Server1 can communicate with Web servers on the Internet.
Which default gateway should you assign to Server1?()
A.10.10.10.129
B.10.10.11.1
C.131.107.1.1
D.192.168.1.1
A.Install the POP3 service on the DNS server.
B.Modify the DNS Server service dependencies.
C.Modify the DNS Server service Recovery options.
D.Install the Universal Description, Discovery, and Integration (UDDI) services on the DNS server.
You have a stand-alone server that runs Windows Server 2003 Service Pack 2 (SP2). wwwwww. ..EEx xxaammk kki iinng ggs ss. ..c ccoomm | English | Chinese(Traditional) | Chinese(Simplified) | - 7 - ExamKings Information Co., Ltd. All rights reserved.You run the Runas command and receive the following error message:“1058: The service cannot be started, either because it is disabled or has no enabled devices associated with it.” You need to ensure that you can use Runas successfully.
What should you do?()
A.Enable the Remote Registry service.
B.Enable the Secondary Logon service.
C.Join the server to an Active Directory domain.
D.From Device Manager, scan for hardware changes.
A.From Event Viewer, view the application log.
B.From Windows Explorer, open the %systemroot%\system32\drivers\etc\services file.
C.From the Services snap-in, view the properties of the World Wide Web Publishing Service.
D.From the command prompt, run Net config server /srvcomment:”World Wide Web Publishing Service”.
our network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2).
You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message.
You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2.You open the Services snap-in on Server2 as shown in the exhibit. (Click the Exhibit button.),You need to ensure that you can connect to Server2 remotely by using Event Viewer.
What should you do on Server2?()
A. Add the Administrator account to the HelpServicesGroup.
B. Set the Startup Type for the Remote Registry service to Automatic and then start the service.
C. Set the Startup Type for the Secondary Logon service to Disabled and then stop the service.
D. Set the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.
最新试题
你是公司网络管理员。你在公司Chicago的办公室工作。你们办公室网络中有40台Windows XP Pro桌面机和1台Windows Server 2003 服务器Server1。Server1通过一条512-Kbps的租用线路连接互联网。公司主办公室在Seattle。在Chicago办公室中的桌面机用户是一种新软件产品的开发人员。你要让这些用户在Server1上的一个共享文件夹中保存每天的工作记录。你要让在Seattle的用户可以同FTP从该文件夹中下载这些记录据。你在Server1安装了IIS并配置了FTP服务站点,以便Seattle的用户可以下载这些数据。 但是你监视发现有来自互联网的连接试探,并注意到有大量的HTTP连接。你要加强Server1的安全,以便不受互联网中恶意用户的影响。Server1也必须连接到互联网中下载升级数据和更新病毒库。你需要再采购一些硬件或软件。你将对Server1如何操作?()
你是公司网络管理员。所有的服务器运行Windows Server 2003。所有的客户端运行Windows XP Professional。你在Server1上安装了WSUS服务。安装必须符合以下要求: Server1上的磁盘空间使用量要最小。所有的升级包在部署到客户端计算机上前必须先测试。你安装校验栏清除了自动批准升级项。打开WSUS控制台。你要按要求完成安装。将采取哪两项操作?()
你是一活动目录域的管理员。所有的服务器运行Windows Server 2003。你将一台Server3配置为域中的DNS服务器。公司最近使用了新的ISP。自从ISP变更后,用户反应不能使用完全合格域名(FQDN)访问外网站点。 你手动配置了一台计算机,使用新的ISP提供的DNS服务器IP地址进行测试。测试计算机能够使用FQDN访问外网站点。你需要确保网络用户能够使用FQDN访问外网站点,同时用户对内网资源的访问不被中断。有哪两种可行的方法可以实现这目的?()
你是Humongous Insurance公司网络管理员。网络是一单活动目录域环境,域名humongous.com。域中有Windows server 2003 和Windows XP Pro计算机。你配置了几个组策略对象(GPOs)使用IPSec来加强那些特定计算机间的可靠通信安全。在Server2上运行着Telnet服务(远程登录)。一个GPO使用IPSec策略来确保对所有到Server2上的Telnet通信加密。但是,你监视网络通信发现这些Telnet连接并未被加密。 你要察看由GPO规定并应用在Server2上的所有IPSec设置。你将使用哪个工具()?
你是公司网络管理员。所有的服务器运行Windows Server 2003。有20名公司员工连到终端服务器Server2上运行程序和通过它访问外网。 这20名员工报告说当他们浏览外网站点时,收到一些安全提示消息。并且一旦连接到Server2上时就不能修改自己客户端计算机浏览器的安全设置项。你需要让这20名用户在连上Server2时能够在自己的计算机上修改IE的安全设置项。你该如何做?()
你是公司网络管理员。网络中包含一个单活动目录域。所有的服务器运行Windows Server 2003。所有的客户端运行Windows XP Professional。 你要实施一个新的软件升级结构。你发现网络中的所有客户计算机都没有安装安全补丁,紧急升级,升级包。你在一台Windows Server 2003服务器Server5上安装了WSUS服务。你进行同步并批准了当前所有的安全补丁,紧急升级,升级包数据。你要确保所有的客户端计算机接收到全部的Microsoft安全补丁,紧急升级,升级包数据。你将采取哪两个操作?()
你是公司的网络管理员。网络是一单活动目录域环境。域中有3台Windows Server 2003域控制器,20台Windows Server 2000域成员服务器,还有750台Windows XP Pro计算机。域中配置为只允许使用Kerberos协议对服务器连接认证授权。有用户报告当他试图连接一台域成员服务器时,收到“Access denied”(访问拒绝)错误提示。你要在用户的客户机上测试Kerberos授权功能。在用户的客户机上的命令提示符(cmd)下,你要运行那些命令?()
你是公司网络管理员。网络中有一台Windows server 2003 Web服务器WebServer1。WebServer1通过专线和互联网连接。你负责监视WebServer1的宽带利用率。你在WebServer1上运行系统监视器监视记录Network Interface object上的Byte Total/sec(总字节数/秒)计数。数据包采样率计数器为每15秒一次。日志记录每天保存一次。已经没有足够的磁盘空间存储日益变大的系统监视器日志记录。你需要重新配置监视器的日志记录设置,以减少捕获数据量。你该如何操作?()
你是公司的网络管理员。有一台Windows Server 2003服务器Server1出现连接故障。你使用了系统监视器和网络监视器来监视Server1。在监视过程中,你发现Server1的可用物理内存仅剩4MB,并且CPU的平均利用率达95%。在调查中,你还发现发给Server1的部分数据包并未被捕捉监视到。你需要确保在Server1的监视操作对Server1的影响最低且所有发送的数据包都要被截获。你该如何操作?()
你是公司网络管理员。网络通过一台Windows server 2003服务器Router11连接互联网。你发现网络中的部分计算机感染了蠕虫病毒,该病毒不时地外网的不同主机发送信息。这些信息都使用同一个TCP/IP端口。你要检查出是哪些计算机感染了病毒。你需要在Router11上配置一个解决方案,该方案须做到以下两点:检测并识别出该蠕虫病毒发送的信息。立即发送一个通知给管理员去修复被感染的计算机。你该如何操作?()