A.client traffic allowed, data captured on all channels
B.client traffic allowed, data captured on a single channel
C.no client traffic allowed, data captured on a single channel
D.no client traffic allowed, data captured on all channels
您可能感兴趣的试卷
你可能感兴趣的试题
You are installing a cisco 4402 series wireless lan controller.
What type of interface is used on the uplink port?()
A.1000base-x mini-gbic
B.10/100/1000 mbps rj45
C.10/100 mbps rj45
D.1000base-sx
A.interference,utilization,and rf diffraction
B.clients,utilization,and multipath interference
C.noise,interference,and coverage holes
D.noise interference,and multipath interference
Static wep is configured on the access point. you are authenticated and associated to the access point but are unable to obtain an ip address.
Which of the following will cause this problem?()
A.invalid radio type selected
B.no wep key configured on the client
C.invalid ssid configured
D.invalid wep key
An reap was supporting 16 wlans, but now it only supports one.
What happened to cause the change?()
A.controller connectivity has been lost.
B.the access point lost its configuration.
C.the access point was rebooted.
D.an access point firmware upgrade is in progress.
A rogue access point is detected on the cisco wcs consolE. upon investigation,the access point is discovered to belong to a neighboring business.
Your administrator should designate the rogue access point as which of the following?()
A.known internal
B.managed
C.friendly
D.known external
A.30 mw
B.100 mw
C.40 mw
D.50 mw
A.rts
B.distance(kilometers)
C.concatenation
D.cca
Your client has deployed a cisco wireless location appliance within their warehouse environment. they have been experiencing problems with tracking objects using active rfid tags. to verify proper access point deployment for location server.
The results from an access point scan should show what information?()
A.a minimum rssi value of -50
B.rogue access points
C.a minimum of three access points
D.non-overlapping channels
A.device type and subnet
B.mac address and device type
C.serial number and version number
D.serial number and subnet
A.lost connection to the controller
B.duplicate ip address
C.startup
D.site survey mode
最新试题
You are configuring an RF group of controllers that coordinate Radio Resource Management calculations.What is the maximum number of WLAN controllers that you can add?()
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference?()
You are installing a Cisco 4402 Series Wireless LAN Controller.What type of interface is used on the uplink port?()
An REAP was supporting 16 WLANs, but now it only supports one.What happened to cause the change?()
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast?()
A Cisco Wireless Location Appliance has been added to track RFID tags placed on laptops beingused in a school.Classrooms at the school have concrete block walls. During testing,you discoverthat the accuracy of the system needs to be improved.You decide to edit the map in the Cisco WCS to add the interior walls.How many interior walls can you add to improve the accuracy of thelocation appliance?()
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS? ()
What is the maximum number of wireless controllers that the highest-end Cisco WCS server canmanage?()
When configuring a WLAN controller for a voice application using Cisco 7920 wireless IP phones,which two general control settings should you select?()
Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticatethe client when one-time passwords are in use?()