You are validating the configuration of your SRX Series device and see the output shown below.What does this indicate?()
A.The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service.
B.The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device.
C.The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service.
D.Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.
您可能感兴趣的试卷
你可能感兴趣的试题
A. Configure IP helper to forward the authentication requests from the clients to the external RADIUS server
B. Configure the supplicant as anexternal authentication server
C. Configure RADIUS proxy on the realm
D. Specify the correct RADIUS port 389 on the Junos Pulse Access Control Service
You are the network administrator for your company. A user is complaining that they are not able to access the network with the Junos Pulse client. You run a packet capture on the network interface to monitor the 802.1X authentication process. You notice that after the EAP- request/identity packet is received, and the supplicant responds with an EAP-response/identity packet, no further communication occurs for several seconds.
What are three causes for this behavior?()
A. The authenticator is not licensed to support Junos Pulse.
B. The authenticator did not receive the EAP-response/identity packet.
C. The authentication server is not receiving the RADIUS packet containing the EAP-response/identity data.
D. The authenticator is sending the request over its loopback interface.
E. The authentication server is sending back a RADIUS response packet, but the authenticator is not forwarding the response back to the supplicant.
A. Ignore
B. Replace users role
C. Terminate user session
D. Disable user account
A. agent session scripts
B. preconfiguration installer
C. Junos Pulse component set
D. agent actions
You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI).
To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?()
A. CLI
B. WebUI
C. NSM
D. Junos Pulse Access Control Service
A. The ability to detect and prevent malicious traffic.
B. The ability to associate security breaches with a specific user.
C. Converged management of network and security events, network flow data, and identity information.
D. Consistent device management across administrative realms.
You have created a security policy on an SRX240 that permits traffic from any source-address, any destination-address, and any application. The policy will be a source IP policy for use with the Junos Pulse Access Control Service.
What must you add to complete the security policy configuration?()
A. The intranet-auth authentication option
B. The redirect-portal application service
C. The uac-policy application service
D. The ipsec-vpn tunnel
A user logs in and is mapped to two roles. The first role has a maximum timeout value of 600 minutes and the default Juniper Networks logo on the user interface page. The second role has a maximum timeout value of 1200 minutes and a custom logo on the user interface page.
Based on the merging of these two roles, which two will be applied?()
A. A custom logo on the user interface page
B. A maximum timeout value of 600 minutes
C. A maximum time out value of 1200 minutes
D. A default Juniper Networks logo on the user interface page
A. Odyssey Access Client
B. Junos Pulse
C. Java agent
D. Agent less access
A. You must configure a security policy on the SRX Series device to allow traffic to flow from the user devices to the MAG Series device.
B. No security policy is necessary on the SRX Series device to allow traffic to flow from the user devices to the MAG Series device.
C. You must configure host-inbound traffic on the SRX Series device to allow SSL traffic between the MAG Series device and the user devices.
D. You must configure host-inbound traffic on the SRX Series device to allow EAP traffic between the MAG Series device and the user devices.
最新试题
What are two use cases enabled by IF-MAP Federation?()
What are three necessary steps for enabling 802.1X access when configuring Layer 2 enforcement?()
You must configure access to the corporate network for employees using a client access method. Users require IPsec tunneling to protected resources and an 802.1X supplicant. Users will access the network using Windows platforms.Which two client access methods would support these requirements?()
You are deploying a Junos Pulse Access Control Service cluster in active/passive mode. How do you configure the IP address on the SRX Series devices?()
You are installing a new deployment of the Junos Pulse Access Control Service. In your environment, you have VoIP handsets that support 802.1X authentication with EAP-MD5.Which deployment constraint must you consider?()
What are two steps to configure user authentication for a Junos Pulse Access Control Service?()
What is a Host Enforcer policy?()
Your manager has informed you that only specific users can have access to the Preferred Members role, and that these users are restricted to the Preferred Members role. The Preferred Members role-mapping rule is currently set as the last rule in your role-mapping rules and is based on username. Currently all users are assigned to the Preferred Members role-mapping rule.Which three changes in the admin GUI will enforce your managers change request?()
You want to provide all users in your corporation with a single agent that provides access to multiple connection types conditionally. For example, you connect to the Junos Pulse Access Control Service if you are connected to the intranet, but you connect to the Junos Pulse Secure Access Service if you are on a remote network.Which agent should you use for this type of connection requirement?()
You want to enforce a Host Checker policy so that only users who pass the policy receive the Employee role. In the admin GUI, which two parameters must you configure?()