Your network contains two subnets. The subnets are configured as shown in the following table.
You have a server named Server2 that runs Windows Server 2012 R2. Server2 is connected to LAN1. You run the route print command as shown in the exhibit.
You need to ensure that Server2 can communicate with the client computers on LAN2.
What should you do?()
A. Change the metric of the 10.10.1.0 route.
B. Set the state of the Teredo interface to disable.
C. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.
D. Run route delete 172.23.2.0.
您可能感兴趣的试卷
你可能感兴趣的试题
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing the new VHD format called VHDX.
Which of the following is TRUE with regards to VHDX? ()
A. It supports virtual hard disk storage capacity of up to 64 GB
B. It supports virtual hard disk storage capacity of up to 64 TB
C. It does not provide protection against data corruption during power failures.
D. It has the ability to store custom metadata about the file that the user might want to record.
Your company has a remote office that contains 1,600 client computers on a single subnet.
You need to select a subnet mask for the network that will support all of the client computers. The solution must minimize the number of unused addresses.
Which subnet mask should you select?()
A. 255.255.248.0
B. 255.255.252.0
C. 255.255.254.0
D. 255.255.240.0
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.
You plan to create a snapshot of VM1. You need to recommend a solution to minimize the amount of disk space used for the snapshot of VM1. What should you do before you create the snapshot?()
A. Run the Stop-VM cmdlet.
B. Run the Convert-VHD cmdlet.
C. Decrease the Maximum RAM
D. Decrease the Minimum RAM.
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2. You log on to Server1. You need to retrieve the IP configurations of Server2.
Which command should you run from Server1?()
A. winrs -r:server2 ipconfig
B. winrm get server2
C. dsquery *-scope base-attr ip, server2
D. ipconfig > server2.ip
A company has a forest with 4 sites. Subnets are as follows:
MainOffice 172.16.1.0 Subnet: 255.255.255.0 Gateway 172.16.1.254
Site1 192.168.12.0 Subnet: 255.255.255.0
Site 2 192.168.13.0 Subnet: 255.255.255.0
Site 3 192.168.14.0 Subnet: 255.255.255.0
Site 4 192.168.15.0 Subnet: 255.255.255.0
You add a new server to the MainOffice and it needs to be able to communicate to all sites.
Which route command would you run?()
A. route add -p 192.168.8.0 netmask 255.255.252.0 172.16.1.254
B. route add -p 192.168.0.0 netmask 255.255.248.0 172.16.1.254
C. route add -p 192.168.12.0 netmask 255.255.252.0 172.16.1.254
D. route add -p 192.168.12.0 netmask 255.255.240.0 172.16.1.254
Your network contains an Active Directory domain named contoso.com. The domain contains 100 user accounts that reside in an organizational unit (OU) named 0U1. You need to ensure that a user named User1 can link and unlink Group Policy objects (GPOs) to OU1. The solution must minimize the number of permissions assigned to User1.
What should you do?()
A. Modify the permissions on OU1.
B. Run the Set-GPPermission cmdlet.
C. Add User1 to the Group Policy Creator Owners group.
D. Modify the permissions on the User1 account.
A. Add permissions to Group1
B. Remove permissions from administrators
C. Add permissions to operators
D. Add permissions to Central Owner
E. Remove permissions from everyone.
Your network contains an Active Directory domain named contoso.com. An organizational unit (OU) named OU1 contains user accounts and computer accounts. A Group Policy object (GPO) named GP1 is linked to the domain. GP1 contains Computer Configuration settings and User Configuration settings.
You need to prevent the User Configuration settings in GP1 from being applied to users.
The solution must ensure that the Computer Configuration settings in GP1 are applied to all client computers.
What should you configure?()
A. the Group Policy loopback processing mode
B. the Block Inheritance feature
C. the Enforced setting
D. the GPO Status
Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.
You need to ensure that you can use Server Manager on DC1 to manage DC2.
Which two tasks should you perform?()
A. Install Microsoft .NET Framework 4 on DC2.
B. Install Remote Server Administration Tools on DC1.
C. Install Remote Server Administration Tools on DC2.
D. Install Windows Management Framework 3.0 on DC2.
最新试题
A company’s network administrator needs to ensure a specific IP address is never assigned by a Windows Server 2012 R2 DHCP server to any device connecting to the network.Which of the following should the administrator configure on the Windows Server 2012 R2 DHCP server?()
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.You have been instructed to make sure that Contoso.com users are not able to install a Windows Store application. You then create a rule for packaged apps.Which of the following is the rule based on? ()
You have a Hyper-V host named Hyper1 that runs Windows Server 2012 R2.Hyper1 hosts several virtual machines that run Windows 8.1.Several developers connect to the virtual machines by using the Virtual Machine Connection tool.You need to ensure that the devlopers can print to their local printers from within virtual machine sessions.What should you configure?()
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.Contoso.com has a server, named ENSUREPASS-SR15, which is configured as a file server.You have received instructions to make sure that a user, named Mia Hamm, has the ability to generate a complete backup of ENSUREPASS-SR15 via Windows Server Backup.Which of the following actions should you take?()
Your network contains one Active Directory forest named contoso.com. The forest contains two child domains named east.contoso.com and west.contoso.com.Your user account is a member of the Domain Admins group in all of the domains. The account is not a member of any other groups.The contoso.com domain contains a Group Policy object (GPO) named DesktopGPO.DesktopGPO is applied to the following containers.An organizational unit (OU) named ALLUsers in contoso.comAn OU named Marketing in east.contoso.comThe east.contoso.com domainThe contoso.com domainA site named CorporateYou delete DesktopGPO.You need to identify which Group Policy links must be removed manually.Which three GPO links should you identify?()
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. You have been instructed to make sure that a server, named ENSUREPASS-SR07, is configured to be managed remotely from ENSUREPASSSR01 using Server Manager.Which of the following is not a valid option to take?()
Your network contains one Active Directory forest named contoso.com. The forest contains a single domain.A user named User5 has the required permissions to link Group Policy (GPOs) to any container in the domain.You need to assign permissions to User5 to meet the following requirements:User5 must be able to edit the GPO settings for all of the GPOs linked to the contoso.com domain.User5 must be able to edit the GPO settings for all of the unlinked GPOs in the domain.User5 must use the principle of least priviledge.What command should you run? To answer, select the appropriate options in the answer area.
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.Contoso.com has a server, named ENSUREPASS-SR07, which has the ADDS, DHCP, and DNS server roles installed. Contoso.com also has a server, named ENSUREPASSSR08, which has the DHCP, and Remote Access server roles installed. You have configured a server, which has the File and Storage Services server role installed, to automatically acquire an IP address. The server is named ENSUREPASSSR09.You then create reservation on ENSUREPASS-SR07, and a filter on ENSUREPASSSR08.Which of the following is a reason for this configuration?()
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.Contoso.com has a server, named ENSUREPASS-SR13, which is configured as the primary DNS server in the Contoso.com domain. Contoso.com has another server, named ENSUREPASS-SR14, which makes use of ENSUREPASSSR13 for DNS queries.You want to make sure that running nslookup.exe from ENSUREPASS-SR14 produces a result that shows the proper name of the default server.Which of the following actions should you take?()
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.Server1 has the Group Policy Management feature installed. Server2 has the Print and Document Services server role installed.On Server2, you open Print Management and you deploy a printer named Printer1 by using a Group Policy object (GPO) named GPO1.When you open GPO1 on Server1, you discover that the Deployed Printers node does not appear.You need to view the Deployed Printers node in GPO1.What should you do?()