You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
You are running a training exercise for junior administrators. You are currently discussing spanned volumes.
Which of the following is TRUE with regards to spanned volumes? ()
A. Spanned volumes do not provide fault tolerance.
B. Spanned volumes are a fault tolerant solution.
C. You can extend a spanned volume onto a maximum of 16 dynamic disks.
D. You cannot create a spanned volume using a system volume or boot volume.
您可能感兴趣的试卷
你可能感兴趣的试题
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 and has the Hyper-V server role installed. HVServer1 hosts 10 virtual machines. All of the virtual machines connect to a virtual switch named Switch1. Switch1 is configured as a private network. All of the virtual machines have the DHCP guard and the router guard settings enabled.
You install the DHCP server role on a virtual machine named Server 1. You authorize Server1 as a DHCP server in contoso.com. You create an IP scope.
You discover that the virtual machines connected to Switch1 do not receive IP settings from Server1.
You need to ensure that the virtual machines can use Server1 as a DHCP server.
What should you do?()
A. Enable MAC address spoofing on Server1.
B. Disable the DHCP guard on all of the virtual machines that are DHCP clients.
C. Disable the DHCP guard on Server1.
D. Enable single-root I/O virtualization (SR-IOV) on Server1.
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
You have received instructions to install the Remote Desktop Services server role on a server, named ENSUREPASS-SR07. You want to achieve this remotely from a server,named ENSUREPASS-SR06.
Which of the following actions should you take?()
A. You should consider accessing the Server Manager console on ENSUREPASS-SR07.
B. You should consider accessing the Server Manager console on ENSUREPASS-SR06.
C. You should consider accessing the TS Manager console on ENSUREPASS-SR07
D. You should consider accessing the TS Manager console on ENSUREPASS-SR06.
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs Windows 8. DC1 is configured as a DHCP server as shown in the exhibit. Computer1 is configured to obtain an IP address automatically.
You need to ensure that Computer1 can receive an IP address from DC1.
What should you do?()
A. Disable the Allow filters.
B. Disable the Deny filters
C. Activate Scope [10.1.1.0] Contoso.com.
D. Authorize dc1.contoso.com.
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2008 R2 installed. Some of Contoso.com’s workstations have Windows 7 installed, while the rest have Windows 8 installed.
After installing a new Windows Server 2012 computer in the Contoso.com domain, you configure it to run the File and Storage Services server role. You are instructed to create a shared folder on the new server, and configure the use of Previous Versions for restoring files located in the shared folder.
Which of the following actions should you take?()
A. You should consider configuring the Shadow Copies settings on the new server.
B. You should consider configuring the Snapshot settings on the new server.
C. You should consider configuring the Background Copy settings on the new server.
D. You should consider configuring the Permission settings on the new server.
Your network contains two subnets. The subnets are configured as shown in the following table.
You have a server named Server2 that runs Windows Server 2012 R2. Server2 is connected to LAN1. You run the route print command as shown in the exhibit.
You need to ensure that Server2 can communicate with the client computers on LAN2.
What should you do?()
A. Change the metric of the 10.10.1.0 route.
B. Set the state of the Teredo interface to disable.
C. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.
D. Run route delete 172.23.2.0.
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing the new VHD format called VHDX.
Which of the following is TRUE with regards to VHDX? ()
A. It supports virtual hard disk storage capacity of up to 64 GB
B. It supports virtual hard disk storage capacity of up to 64 TB
C. It does not provide protection against data corruption during power failures.
D. It has the ability to store custom metadata about the file that the user might want to record.
Your company has a remote office that contains 1,600 client computers on a single subnet.
You need to select a subnet mask for the network that will support all of the client computers. The solution must minimize the number of unused addresses.
Which subnet mask should you select?()
A. 255.255.248.0
B. 255.255.252.0
C. 255.255.254.0
D. 255.255.240.0
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.
You plan to create a snapshot of VM1. You need to recommend a solution to minimize the amount of disk space used for the snapshot of VM1. What should you do before you create the snapshot?()
A. Run the Stop-VM cmdlet.
B. Run the Convert-VHD cmdlet.
C. Decrease the Maximum RAM
D. Decrease the Minimum RAM.
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2. You log on to Server1. You need to retrieve the IP configurations of Server2.
Which command should you run from Server1?()
A. winrs -r:server2 ipconfig
B. winrm get server2
C. dsquery *-scope base-attr ip, server2
D. ipconfig > server2.ip
最新试题
You have a server named Server1 that runs Windows Server 2012 R2.Your network has IPSec policies configured.You need to exempt ICMP and router discovery traffic from the IPSec rules in WindowsFirewall with Advanced Security.Which cmdlet should you use?()
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.Contoso.com has a server, named ENSUREPASS-SR13. ENSUREPASS-SR13 hosts a shared folder, named ENSUREPASSShare, which has been shared as ENSUREPASSShare$.Which of the following is TRUE with regards to sharing the folder in this manner?()
A company’s network administrator needs to ensure a specific IP address is never assigned by a Windows Server 2012 R2 DHCP server to any device connecting to the network.Which of the following should the administrator configure on the Windows Server 2012 R2 DHCP server?()
A company’s server virtualization team needs to provision a series of Hyper-V workloads to use existing network storage arrays. The team has chosen to use Fibre Channel ports within the guest operating systems.Which of the following Windows Server versions can be used as guest operating systems when using Hyper-V Fibre Channel ports?()
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 hosts several virtual machines. Each virtual machine has two network adapters.Server1 contains several virtual switches.On Server1, you create a NIC team that has two network adapters.You discover that the NIC team is set to Static Teaming mode.You need to modify the NIC teaming mode to Switch Independent.Which cmdlet should you use?()
You work as an administrator at Contoso.com. The Contoso.com network consists of an Active Directory forest that contains a root domain, named Contoso.com, and two child domains, named us.Contoso.com and uk.Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.The root domain hosts a domain local distribution group, named ENSUREPASSGroup.You are preparing to issue ENSUREPASSGroup read-only access to a shared folder hosted by the us.Contoso.com domain.You want to make sure that ENSUREPASSGroup is able to access the shared folder in the us.Contoso.com domain.Which of the following actions should you take?()
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.Contoso.com has a server, named ENSUREPASS-SR15, which is configured as a file server.You have received instructions to make sure that a user, named Mia Hamm, has the ability to generate a complete backup of ENSUREPASS-SR15 via Windows Server Backup.Which of the following actions should you take?()
Your network contains an Active Directory domain named contoso.com.You create a software restriction policy to allow an application named App1 by using a certificate rule.You need to prevent the software restriction policy from applying to users that are members of the local Administrators group.What should you do?()
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.Server1 has the Group Policy Management feature installed. Server2 has the Print and Document Services server role installed.On Server2, you open Print Management and you deploy a printer named Printer1 by using a Group Policy object (GPO) named GPO1.When you open GPO1 on Server1, you discover that the Deployed Printers node does not appear.You need to view the Deployed Printers node in GPO1.What should you do?()
You have Windows Server 2012 R2 DHCP servers with 50 leases.You want to convert leases into reservations using PowerShell command.What do you need to have to accomplish this?()