A.fuel oil pump will over-speed if dirt is not removed
B.fuel oil transfer pumps cannot tolerate small amounts of dirt in the oil
C.fuel injectors may be damaged by foreign particles in the fuel oil
D.dirty fuel will clog the intake air filter
您可能感兴趣的试卷
你可能感兴趣的试题
A.low lube oil temperature
B.high ambient air temperature
C.low tube oil pressure
D.high exhaust system back pressure
A.the type and size of the engine
B.the condition of the engine
C.ambient temperature
D.all of the above
A.it has a longer power stroke
B.more air gets into the cylinder each stroke
C.it develops twice as many power strokes at the same speed
D.higher combustion pressure is developed
A.viscosity is too low
B.temperature is too low
C.pump discharge pressure is higher than the systems pressure
D.pump capacity is greater than the systems needs
A.they must be located at the after end of the engine
B.they can only be used with one engine at a time
C.they eliminate the need for controllable pitch propellers
D.they are connected to the engine with a flexible coupling
A.excessive fuel penetration
B.prolonged injection lag
C.reduced ignition lag
D.prolonged ignition lag
A.control axial movement of the crankshaft
B.transmit engine thrust to the propeller shaft
C.absorb vibrations in the propeller shafting
D.prevent propeller thrust from being transmitted to the hul
A.wheelhouse control station
B.engine room control station
C.captains office
D.chief engineers office
A.a shortened ignition delay period
B.a lean fuel/air mixture
C.excess fuel in the combustion chamber
D.rapid vaporization of injected fuel droplets
A.at any time
B.only after the engine room control station is switched to “bridge control”
C.whenever the secondary station is switched to "bridge control"
D.with the approval of the chief engineer only
最新试题
When fuel oil has seriously contaminated a diesel engine lubricating oil, you should ().
Proper filtering and straining of fuel oil is important because the ().
A diesel engine is operating with excessively high exhaust temperatures at all cylindersTo correct this condition, you should FIRST ().
Which of the two events listed occurs simultaneously in a two-stroke/cycle diesel engine?()
The function of diesel engine piston compression rings is to ().
The highest pressure in a diesel engine cylinder normally occurs ().
For a given size engine, the two-stroke/cycle diesel engine will deliver more power than a four-stroke/cycle diesel engine because ().
A diesel engine piston ring face is in direct contact with the ().
The most important factor in engine performance is the actual power output at the end of the crankshaft available for doing workThis is known as ().
The ability of the governor to prevent fluctuations in engine speed is termed ().