A.An alarm device with audible and visible signals is required for all cooling water systems
B.Propulsion engines with bores over 200 mm are to be fitted with cooling water jackets
C.Each totally enclosed cooling system shall be provided with a suitable head tank
D.Drain cocks are to be provided at the lowest points of all cylinder water jackets
您可能感兴趣的试卷
你可能感兴趣的试题
A.turbocharger efficiency
B.engine power output
C.carbon deposits on fuel injectors
D.cylinder scavenging
A.holed
B.fouled
C.clean
D.dry
A.radiated through the engine block
B.transferred to water cooled cylinder walls
C.conducted through the piston crown
D.transferred to escaping exhaust gases
A.the elimination of valve wear
B.improved atomization
C.a decrease in cylinder blow-by
D.an increase in cylinder blow-by
A.supercharging
B.scavenging
C.turbulence
D.swept volume charging
A.Each engine must have its own engine driven cooling water pump capable of providing cooling for all ranges of operation
B.propulsion engines with bores exceeding 200 mm are to be fitted with a means to display the cooling water temperature of each cylinder
C.At least two independent sea suctions are to be provided for supplying water to the engine jackets or to the heat exchangers
D.Suitable strain are to be fitted between the circulating pumps and heat exchangers when sea water is used for direct cooling
A.a clogged filter element
B.excessive lube oil pump discharge pressure
C.excessive lube oil flow
D.excessively hot lube oil
A.improper venting of the cooling system
B.carrying the expansion tank water level too high
C.a totally clogged impeller in the cooling water pump
D.an incorrectly set cooling system temperature control
A.crankcase
B.low lube oil temperature
C.excessive oil consumption
D.low bearing oil pressure
A.cam action
B.spring force
C.fuel oil pressure
D.firing pressure
最新试题
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The main purpose of port State control is not to()
() is not installed on the main switchboar.
Diesel engine air start system check valves are opened by ()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
The shipboard oil pollution emergency plan will be invalid after ()