A.deaerate the first effect distillate
B.filter the condensed flash vapors
C.deaerate the first and second effect distillate
D.remove small water droplets entrained in the flashed vapor
您可能感兴趣的试卷
你可能感兴趣的试题
A.vacuum drag from the auxiliary condensate system
B.individual vacuum pumps
C.a single non-condensing air ejector
D.a two stage air ejector
A.vaporize, with the un-flashed water remaining at the temperature at which it entered the flash chamber
B.vaporize, with the un-flashed eater equalizing to the saturation conditions existing in the f lash chamber
C.vaporize, with the remaining water a t a temperature greater than it entered the flash chamber
D.boil, allowing steam bubbles to rise through the brine at the bottom of the flash chamber
A.combined as part of the salt water feed heater
B.the open area above the brine levels in the first and second stages
C.combined as part of the distillate cooler
D.another term used to describe the vapor feed heater
A.distilling condenser
B.salt water feed heater
C.distillate cooler
D.flash chamber
A.higher than the first stage feed-water temperature and absolute shell pressure
B.lower than the first stage feed-water temperature and absolute shell pressure
C.the same as the first stage feed-water temperature and absolute shell pressure
D.not related to the feed-water temperature and absolute shell pressure
A.lowering brine discharge density
B.decreasing the absolute pressure of each stage
C.increasing the saltwater feed heater temperature
D.increasing the pressure at the spray pipe
A.Bedplate
B.Block
C.Base
D.Sump
A.clearance between the top of the valve stem and the rocker arm
B.compression of the valve springs
C.clearance between the valve seat inserts and the head
D.out of roundness of the fuel injection cams
A.low lube oil temperature
B.low lube oil pressure
C.high exhaust temperature
D.high cooling water pressure
A.Dirty lube oil filter
B.Too much piston ring wear
C.High lube oil viscosity
D.Low lube oil temperature
最新试题
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The cetane rating of diesel fuel is an indication of the ()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
() is not installed on the main switchboar.
Cold weather starting of a diesel engine may be made easier by()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
Under MARPOL Code the ship to which it applies has to carry ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()