A.show ip rou sum
B.sh ver
C.show diag
D.show config
您可能感兴趣的试卷
你可能感兴趣的试题
A.两种模式:Frame-mode和cell-mode
B.一种模式:Frame-mode
C.一种模式:cell-mode
D.MPLS不分模式
A.收敛的速度
B.配置简便
C.支持变长掩码
D.大规模部署
A.debug ospf events
B.show ip ospf border-routers
C.show ip ospf neighbor
D.show ip ospf database
A.show ip traffic
B.show ip flow cache
C.show ip cache
D.None of the above
A.debug ospf events
B.show ip ospf border-routers
C.show ip ospf neighbor
D.show ip ospf database
A.Very reliable forwarding
B.Virtual routing forwarding instances
C.Vip redundancy features
D.Virtual routing format
A.show ip route
B.show ip cef
C.show ip bgp
D.show ip cache
A.show isis neigbor
B.show ospf neighbor
C.show bgp neighbor
D.show cdp neighbor
A.sh run/show log/show tech
B.show run
C.show log/show config
D.show run/sh config
A.show env xxx
B.show log
C.show clnsroute
D.show inter
最新试题
7750SR的网络接口test需要启用urpf的严格模式,请写相关命令及查看urpf状态的命令。
现有2台NTP服务器,地址分别为10.1.1.1和10.1.1.2,其中地址为10.1.1.1的NTP服务器为主用,7750通过这二台NTP服务器同步时间,请写出7750的NTP配置命令
7750路由器现在1槽位有一块iom-20g-b,并且1/1有一个m10-1gb-sfpmda,当前板卡正常运行,请写出删除全部MDA及IOM的配置命令。
7750SR的1/1/1端口为network模式,null封装,现需要将1/1/1端口镜像到1/1/2端口,假定1/1/2端口已完成相关配置,请写出镜像的配置。假定镜像id为1.
请写出将7750SR强制倒换主控板主备状态的命令。
请写出7750SR配置业务入方向最大速率及保证速率为10Mbps的Qos策略,假定所有的流均为缺省的be流,策略号为10。
7750需要通过radius服务器进行登陆用户认证,Radius服务器地址为10.1.1.1,radius接入认证密码为aaa,请写出相应的配置命令。
如果要查看7750SR的cf3上的new.cfg文件内容,请写出相关操作命令。
7750SR路由器需要将cflow和radius应用的源地址改为test接口的地址为源,请写出相关的配置命令。
请写出7750的时区调整为PRC08的操作命令并同时写出修改系统时间为2009/6/108:00:00的操作命令。