单项选择题Which command can you use to manually assign a static IPV6 address to a router interface?()

A.ipv6 address PREFIX_1::1/64
B.ipv6 autoconfig 2001:db8:2222:7272::72/64
C.ipv6 autoconfig
D.ipv6 address 2001:db8:2222:7272::72/64


您可能感兴趣的试卷

你可能感兴趣的试题

1.多项选择题For what two purposes does the Ethernet protocol use physical addresses? ()

A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30

2.多项选择题

What can be determined from the line of show ip route output shown in the exhibit?()

A.The next routing update can be expected in 35 seconds.
B.The IP address 10.10.10.6 is configured on S0/1.
C.The IP address 10.10.10.8 is configured on S0/1.
D.This route is using the default administrative distance.
E.The 10.10.10.8 network is two hops away from this router.

3.单项选择题使配置的访问列表应用到接口上的命令是什么?()

A.access-group
B.access-list
C.acl
D.firewall packet-filter xxxx inbound/outbound

4.多项选择题Which destination addresses will be used by Host A to send data to Host C?()

A.the IP address of Switch 1
B.the MAC address of Switch 1
C.the IP address of Host C
D.the MAC address of Host C
E.the IP address of the router's E0 interface
F.the MAC address of the router's E0 interface

5.单项选择题在一个接口配置x25 map ip 102.112.43.125 x121-address 12345命令,其中102.112.43.125和123456分别是()。

A.对端的IP地址和对端的x.121地址
B.对端的IP地址和本接口的x.121地址
C.本接口的IP地址和对端的x.121地址
D.本接口的IP地址和本接口的x.121地址

6.单项选择题Why will as witch never learn a broadcast address?()

A.Broadcast frames are never sent to swiches.
B.Broadcast addresses use an incorrect format for the switching table.
C.A broadcast address will never be the source address of a frame.
D.Broadcasts only use network layer addressing.
E.A broadcast frame is never forwarded by a switch.

7.单项选择题Which command shows if an access list is assigned to an interface?()

A.show ip interface [interface] access-lists
B.show ip access-lists interface [interface]
C.show ip interface [interface]
D.show ip access-lists [interface]

8.多项选择题x.25协议包含三层()。

A.分组层
B.数据链路层
C.物理层
D.传输层
E.网络层

9.多项选择题Which of the following are types of flow control?()

A.buffering
B.cut-through
C.windowing
D.congestion avoidance
E.load balancing

10.多项选择题PPP协议族中,哪个协议提供了对网络层的支持?()

A.IPCP
B.LCP
C.IPXCP
D.SNA

最新试题

请参见图示。当计算机A 向计算机D 发送帧时,哪些计算机会接收该帧?()

题型:单项选择题

OSI 哪一层可提供有序的数据重构服务?()

题型:单项选择题

请参见图示。一台路由器(其路由表如图所示)收到发往192.168.1.4的数据包。路由器将如何处理该数据包?()

题型:单项选择题

请参见图示。网络技术人员试图确定主机A 的正确IP 地址配置。以下哪一项是主机A 的有效配置?()

题型:单项选择题

PC 无法连接到任何远程网站,无法ping 通其默认网关,也无法ping 通本地网段中工作正常的打印机。以下哪项操作可以确认此PC 上的TCP/IP 协议栈是否工作正常?()

题型:单项选择题

请参见图示。主机A 尝试与主机C 建立TCP/IP 会话。在尝试期间,路由器Y 的FastEthernet 接口fa0/1捕获到一个帧。捕获的帧中包含源IP 地址为172.16.1.5而目的IP 地址为172.16.7.24的数据包。捕获该帧时,它的源MAC 地址是什么?()

题型:单项选择题

在Cisco IOS 设备中,启动配置文件存储于何处?()

题型:单项选择题

请参见图示。对于从主机A 向Web 服务器发出的网页请求,正确的目的套接字数字是什么?()

题型:单项选择题

请参见图示。下列哪组设备仅包含中间设备?()

题型:单项选择题

在配置路由器时,网络技术人员想要命名路由器。输入hostname 命令后,技术人员会看到下列哪一项提示?()

题型:单项选择题