A.rip
B.ospf
C.igrp
D.bgp
E.eigrp
您可能感兴趣的试卷
你可能感兴趣的试题
A.主机地址
B.网络地址
C.所有主机
D.所有网络
A.127.0.0.1
B.172.16.0.1
C.192.168.0.5
D.223.0.0.1
E.224.0.0.5
F.254.255.255.255
A.config myrouter
B.display myroter
C.sysname myrouter
Which of the following statements describe the network shown in the graphic?()
A.There are two broadcast domains in the network.
B.There are four broadcast domains in the network.
C.There are six broadcast domains in the network.
D.There are four collision domains in the network.
E.There are five collision domains in the network.
F.There are seven collision domains in the network.
A.IP地址
B.主机地址
C.网络地址
D.通配符
A.provides common view of entire topology
B.exchanges routing tables with neighbors
C.calculates shortest path
D.utilizes event-triggered updates
E.utilizes frequent periodic updates
A.8
B.12
C.20
D.24
A.SW1#show swithport port-security interface FastEthernet 0/12
B.SW1#show swithport port-secure interface FastEthernet 0/12
C.SW1#show port-secure interface FastEthernet 0/12
D.SW1#show running-config
A.dialer
B.语音接口
C.serial口
D.子接口
E.CE1/PRI接口
F.虚拟接口模板
G.ISDNBRI接口
H.备份中心逻辑通道
A.Switches are primarily software based while bridges are hardware based.
B.Both bridges and switches forward Layer 2 broadcasts.
C.Bridges are frequently faster than switches.
D.Switches have a higher number of ports than most bridges.
E.Bridges define broadcast domains while switches define collision domains.
F.Both bridges and switches make forwarding decisions based on Layer 2 addresses.
最新试题
请参见图示。主机A 尝试与主机C 建立TCP/IP 会话。在尝试期间,路由器Y 的FastEthernet 接口fa0/1捕获到一个帧。捕获的帧中包含源IP 地址为172.16.1.5而目的IP 地址为172.16.7.24的数据包。捕获该帧时,它的源MAC 地址是什么?()
请参见图示。某用户想要查看当前的配置。图中所示为ipconfig/all 命令的输出。从此输出可以得到哪三项结论?()
请参见图示。从主机X 发出的到主机Y 的tracert 命令已成功。下列哪一项正确地反映了追踪列表中显示的中间网络设备的顺序?()
请参见图示。主机A 正在访问多台服务器。结合使用什么端口号和地址即可唯一识别特定服务器上运行的特定进程?()
请参见图示。下列哪组设备仅包含中间设备?()
PC 无法连接到任何远程网站,无法ping 通其默认网关,也无法ping 通本地网段中工作正常的打印机。以下哪项操作可以确认此PC 上的TCP/IP 协议栈是否工作正常?()
传输层如何让主机能同时针对不同应用程序维护多个通信流?()
OSI 模型的哪两项功能在第2层实现?()
请参见图示。网络中的所有设备均使用默认配置。此拓扑中存在多少个广播域?()
以下哪两种介质可提供高达1Gb/s 的带宽?()