Refer to the exhibit. Which switching feature is being tested?()
A. loop guard
B. PortFast
C. root guard
D. BDPU guard
您可能感兴趣的试卷
你可能感兴趣的试题
A.Prepend extra AS hops to the BGP prefix.
B.Advertise more specific BGP prefixes (longer mask).
C.Add (prepend) one or more communities to the prefix that is advertised by BGP.
D.Have BGP dampen the prefix.
A.On/On
B.On/Auto
C.Passive/Active
D.Desirable/Auto
E.Active/Active
F.Desirable/Desirable
A.The VLAN to instance mapping is a normal 16-byte field in the MST BPDU.
B.The VLAN to instance mapping is a normal 12-byte field in the MST BPDU.
C.The VLAN to instance mapping is a 16-byte MD5 signature field in the MST BPDU.
D.The VLAN to instance mapping is a 12-byte MD5 signature field in the MST BPDU.
A.lowest root bridge ID
B.lowest path cost to root bridge
C.lowest sender bridge ID
D.highest port ID
E.highest root bridge ID
F.highest path cost to root bridge
A.VTPv3 supports 8K VLANs.
B.VTPv3 supports private VLAN mapping.
C.VTPv3 allows for domain discovery.
D.VTPv3 uses a primary server concept to avoid configuration revision issues.
E.VTPv3 is not compatible with VTPv1 or VTPv2.
F.VTPv3 has a hidden password option.
A. interface bandwidth
B. interface delay
C. interface bandwidth and delay
D. hop count
E. bridge priority
A. Loop guard can be used with root guard simultaneously on the same port on the same VLAN while UDLD cannot
B. UDLD protects against STP failures caused by cabling problems that create one-way links.
C. Loop guard detects and protects against duplicate packets being received and transmitted on different ports
D. UDLD protects against unidirectional cabling problems on copper and fiber media.
E. Loop guard protects against STP failures caused by problems that result in the loss of BPDUs from a designated switch port.
A.followers field
B.MD5 digest
C.VLAN information
D.sequence number
Refer to the exhibit. In the diagram,the switches are running IEEE 802.1w RSPT. On which ports should root guard be enabled in order to facilitate deterministic root bridge election under normal and failure scenarios?()
A. GE-3/1, GE-3/2
B. FE-2/1, FE-3/2
C. GE-1/1, GE-1/2
D. GE-4/1, GE-4/2
E. GE-2/1, GE-2/2
F. GE-3/1, GE-3/2, GE-4/1, GE-4/2, FE-2/1, FE-3/2
A.runts
B.FCS errors
C.interface resets
D.late collisions
最新试题
Which types of prefixes will a router running BGP most likely advertise to an IBGP peer, assuming it is notconfigured as a route reflector?()
Which two of these are used in the selection of a root bridge in a network utilizing Spanning Tree ProtocolIEEE 802.1 D?()
What is also called Type 0 authentication in OSPF on Cisco Routers?()
Which two statements about SA caching are true?()
Which three options are valid ways to filter routes from a BGP peer?()
Choose two commands that are required to enable multicast on a router, when it is known that thereceivers use a specific functionality of IGMPv3.()
All of these are fundamental building blocks of differentiated services Traffic Conditioner Block exceptwhich one?()
When STP UplinkFast is enabled on a switch utilizing the default bridge priority, what will the new bridgepriority be changed to?()
Two routers configured to run BGP have been connected to a firewall, one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer, including the correctBGP session endpoint addresses and the correct BGP session hop-count limit EBGP multihop. What is agood first test to see if BGP will work across the firewall?()
On the basis of the network provided in the exhibit, all routers are configured to run EIGRP on all links. If the link between PG-R1 and PG-R2 fails, what is the maximum number of queries PG-R3 will receive for 192.168.1.0/24, assuming that all the packets sent during convergence are transmitted once (there are no dropped or retransmitted packets)?()