A.data marked with DSCP AF21,VOIP marked with DSCP EF
B.data marked with DSCP AF51,VOIP marked with DSCP EF
C.data marked with the DE-bit. VOIP marked with the CLP-bit
D.data marked with DSCP EF,VOIP marked with DSCP AF31
E.data marked with IP precedence 5,VOIP marked with DSCP EF
您可能感兴趣的试卷
你可能感兴趣的试题
A.mark VOIP traffic with IP precedence 6 and configure only fair-queue’ on the links
B.configure the scheduler allocate 3000 1000 command to allow the OoS code to have enough CPU cycles
C.enable class-based traffic shaping on the VOIP traffic class
D.enable Layer 2 fragmentation and interleaving on the links
E.enable Frame Relay on the links and send voice and data on different Frame Relay PVCs
A.1) lowest root bridge id,2) lowest sender bridge id,3) lowest port id,4) lowest root path cost
B.1) lowest root path cost,2) lowest root bridge id,3) lowest sender bridge id,4) lowest sender port id
C.1) lowest root bridge id,2) lowest sender bridge id,3) lowest root path cost,4) lowest sender port id
D.1) lowest root bridge id,2) lowest root path cost,3) lowest sender bridge id,4) lowest sender port id
A.VTP updates are ignored and forwarded out all ports.
B.VTP updates are ignored and forwarded out trunks only.
C.VTP updates are made to the VLAN database and are forwarded out trunks only.
D.VTP updates are ignored and are not forwarded.
A.8192
B.16384
C.49152
D.65535
A.Designated Root Cost
B.bridge ID priority
C.max age
D.bridge ID MAC address
E.Designated Root Priority
F.forward delay
A.one global STP instance for all VLANs
B.one STP instance for each VLAN
C.one STP instance per set of VLANs
D.one STP instance per set of bridges
A.Attempt to TELNET from the router connected to the inside of the firewall to the router connected to theoutside of the firewall. If telnet works, BGP will work, since telnet and BGP both use TCP to transportdata.
B.Ping from the router connected to the inside interface of the firewall to the router connected to theoutside interface of the firewall. If you can ping between them, BGP should work, since BGP uses IP totransport packets.
C.There is no way to make BGP work across a firewall without special configuration, so there is no simpletest that will show you if BGP will work or not, other than trying to start the peering session.
D.There is no way to make BGP work across a firewall.
A.ip pim rp-address
B.ip pim ssm
C.ip pim sparse-mode
D.ip pim passive
A.MD5
B.There is no Type 0 authentication
C.SHA1
D.Null
A.UDP/1812
B.UDP/1813
C.TCP/1812
D.TCP/1813
最新试题
Which two of these are used in the selection of a root bridge in a network utilizing Spanning Tree ProtocolIEEE 802.1 D?()
Which of these best describes the actions taken when a VTP message is received on a switch configuredwith the VTP mode "transparent"?()
Which three options are valid ways to filter routes from a BGP peer?()
On the basis of the network provided in the exhibit, all routers are configured to run EIGRP on all links. If the link between PG-R1 and PG-R2 fails, what is the maximum number of queries PG-R3 will receive for 192.168.1.0/24, assuming that all the packets sent during convergence are transmitted once (there are no dropped or retransmitted packets)?()
Which two EIGRP options will limit a query domain?()
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message knowing that the MSDP router is also configured as an RP for the PIM domain?()
In order to configure two routers as anycast RPs, which of these requirements, af a minimum, must besatisfied?()
You are the network administrator of an enterprise with a main site and multiple remote sites. Your networkcarries both VOIP and data traffic. You agree with your service provider to classify VOIP and data trafficaccording to the different service RFCs. How can your data and VOIP traffic be marked?()
Which two statements about SA caching are true?()
How does an IPv6 router deal with a packet that is larger than the outgoing interface MTU?()