A. show memory detailed
B. show process cpu sorted
C. show system resources
D. show hardware capacity
您可能感兴趣的试卷
你可能感兴趣的试题
A. show interface priority-flow-control
B. show interface queuing
C. show queuing interface
D. show policy-map system type queuing
E. show policy-map interface ethernet
Nexus7000# config t
Nexus700(config)# interface ethernet 2/11
Nexus700(config-if)# switchport mode private-vlan host
Nexus700(config-if)# switchport private-vlan host-association 14 50
Nexus700(config-if)# exit
Nexus700(config)#
What will this command sequence achieve?()
A. associate interface E2/11 to community VLANs 14 and 50
B. associate interface E2/11 to secondary VLANs 14 and 50
C. associate interface E2/11 to primary VLAN 50 and secondary VLAN 14
D. associate interface E2/11 to primary VLAN 14 and secondary VLAN 50
A. Port priority value can be configured between 1 and 65535.
B. A higher port priority value means a higher priority of LACP.
C. Port priority can be configured so that specific links can be chosen as active links rather than the hot standby links within the port channel.
D. LACP uses the port priority with the port number to form the port identifier.
E. LACP Port priority default value should always be changed
A. Cisco AV-pair
B. TACACS+ or RADIUS ack frame role attribute
C. DH-CHAP challenge attribute
D. privilege level attribute
A. Graceful consistency check is enabled by default.
B. When graceful consistency check is enabled, only the links on the secondary peer device are suspended.
C. Graceful consistency check is disabled by default, so to enable this feature, use graceful consistency-check command under VPC domain configuration mode.
D. When graceful consistency check is enabled, only the inconsistent VLANs on the secondary peer device are suspended.
A. A single VACL can be shared across two or more VDCs.
B. Use of VACLs requires no special license to be installed.
C. VACLs make use of IP or MAC ACLs.
D. Only options drop and forward are permitted.
A. Adjacency Server is required when OTV is deployed with unicast-only transport.
B. Adjacency Server is required when OTV is deployed with multicast-enabled transport.
C. Each OTV device wishing to join a specific OTV logical overlay needs to first register with the Adjacency Server.
D. Each OTV device trying to join a specific OTV logical overlay needs to be configured as an Adjacency Server.
A. NMAC-SHA-96 authentication protocol
B. HMAC-MD5-96 authentication protocol
C. Community String Match protocol
D. NMAC-MD5-96 authentication protocol
E. HMAC-SHA-96 authentication protocol
A. GLBP redirect timer
B. GLBP forwarder pre-empt delay minimum timer
C. GLBP hold timer
D. GLBP pre-empt delay minimum timer
E. GLBP extended hold timer
F. GLBP nonstop forwarding timer
A. DSA key generated with 512 bits
B. RSA key generated with 768 bits
C. RSA key generated with 1024 bits
D. DSA key generated with 1024 bits
E. RSA key generated with 2048 bits
![](https://static.ppkao.com/ppmg/img/appqrcode.png)
最新试题
What is the use of an "all configuration" backup in Cisco UCS?()
What is the appliance port used to connect to in a Cisco Unified Computing System?()
KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector, to report virtual IP and real server availability. Which statement is true about KAL-AP?()
In a Cisco Unified Computing System, where are SAN port channels connected to?()
Which statements are true regarding the Cisco UCS fabric failover feature? ()
Given a Cisco Unified Computing System, which is a valid port type in end-host mode?()
What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager?()
In a Cisco Unified Computing System, What is the "designated receiver" port in end-host mode used for?()
A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types?()
Application Control Engine (ACE) can check the health of servers and server farms by configuring health probes (which are sometimes referred to as keepalives). A probe can be one of many types. Which are valid ACE probes? ()