A. Fibre Channel storage
B. UCS C-Series servers
C. NFS storage
D. UCS chassis
E. Other fabric interconnect
您可能感兴趣的试卷
你可能感兴趣的试题
A. End-host mode is synonymous with NPV mode.
B. In end-host mode， only hard pinning of vHBAs to Fibre Channel uplink ports is allowed.
C. Making configuration changes between Fibre Channel switching mode and end-host mode is nondisruptive.
D. End-host mode is the default Fibre Channel switching mode.
A. In the blade BIOS
B. In the operating system
C. In the service profile
D. In the card option ROM
A. The QoS policy assigns a system class to the outgoing traffic for a vNIC or vHBA.
B. Flow-control policies determine whether the uplink Ethernet ports in a Cisco UCS environment send and receive IEEE 802.3x pause frames when the send buffer for a port fills.
C. If no system class is configured as CoS 0， the Fibre Channel system class is used.
D. The user can configure QoS for these system classes： platinum， gold， silver， best effort， Fibre Channel.
E. When configuring a system class， the type of adapter in a server may limit the maximum MTU supported.
A. boot policy and BIOS policy
B. disk scrub and boot policy
C. BIOS setting scrub， boot policy， and BIOS policy
D. disk scrub and BIOS setting scrub
A. name
B. best-effort
C. burst
D. rate
E. host control
A. logical configuration
B. all configuration
C. full state
D. system configuration
A. If disk scrub is enabled， all BIOS settings for the server are erased.
B. If disk scrub is enabled， all the data access on any local drives is destroyed.
C. If disk scrub is enabled， the LSI active RAID is destroyed but data is still preserved.
D. If disk scrub is disabled， all data on any local drives is preserved， including the local storage configuration.
E. If disk scrub is enabled， all data on any local drives is preserved， including the local storage configuration.
A. Power capping helps mainly in reducing data center footprint.
B. Power capping helps reduce data center cooling.
C. A single power cap group policy allows you to set power limits across multiple UCS domains.
D. You can have multiple power cap groups per UCS domain.
E. Each blade within a UCS 5108 chassis can belong to a separate power cap group.
A. from 10：00：00：00：00：00：00：00 to 10：FF：FF：FF：FF：FF：FF：FF
B. from 20：00：00：00：00：00：00：00 to 20：FF：FF：FF：FF：FF：FF：FF
C. from 30：00：00：00：00：00：00：00 to 30：FF：FF：FF：FF：FF：FF：FF
D. from 40：00：00：00：00：00：00：00 to 40：FF：FF：FF：FF：FF：FF：FF
A. NPIV provides a means to assign multiple Fibre Channel IDs to a single N-port.
B. NPIV can be enabled on a per-VSAN basis.
C. NPIV requires a "write erase" and then reload the switch in order to come up into NPIV mode.
D. NPIV is a Cisco proprietary feature and as such works only between two Cisco switches.
E. NPIV must not be enabled on a switch that is also running N-port virtualization.
最新试题
Which two statements about end-host mode in SAN connectivity in a Cisco UCS environment are true？ （）
What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）
Which are valid statements about Cisco Virtual Interface Card （VIC）？ （）
Refer to the exhibit. According to the equipment tab in Cisco UCS Manager， which is true？（）
An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true？（）
What would be the cause for the following fault in UCS Manager？（） "ether VIF x / xxx down， reason： ENM source pinning failed"
Application Control Engine （ACE） can check the health of servers and server farms by configuring health probes （which are sometimes referred to as keepalives）. A probe can be one of many types. Which are valid ACE probes？ （）
Where are SAN Port Channel is created in UCS Manager？（）
In a Cisco Unified Computing System， where are SAN port channels connected to？（）
KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector， to report virtual IP and real server availability. Which statement is true about KAL-AP？（）