A. boot policy and BIOS policy
B. disk scrub and boot policy
C. BIOS setting scrub, boot policy, and BIOS policy
D. disk scrub and BIOS setting scrub
您可能感兴趣的试卷
你可能感兴趣的试题
A. name
B. best-effort
C. burst
D. rate
E. host control
A. logical configuration
B. all configuration
C. full state
D. system configuration
A. If disk scrub is enabled, all BIOS settings for the server are erased.
B. If disk scrub is enabled, all the data access on any local drives is destroyed.
C. If disk scrub is enabled, the LSI active RAID is destroyed but data is still preserved.
D. If disk scrub is disabled, all data on any local drives is preserved, including the local storage configuration.
E. If disk scrub is enabled, all data on any local drives is preserved, including the local storage configuration.
A. Power capping helps mainly in reducing data center footprint.
B. Power capping helps reduce data center cooling.
C. A single power cap group policy allows you to set power limits across multiple UCS domains.
D. You can have multiple power cap groups per UCS domain.
E. Each blade within a UCS 5108 chassis can belong to a separate power cap group.
A. from 10:00:00:00:00:00:00:00 to 10:FF:FF:FF:FF:FF:FF:FF
B. from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF
C. from 30:00:00:00:00:00:00:00 to 30:FF:FF:FF:FF:FF:FF:FF
D. from 40:00:00:00:00:00:00:00 to 40:FF:FF:FF:FF:FF:FF:FF
A. NPIV provides a means to assign multiple Fibre Channel IDs to a single N-port.
B. NPIV can be enabled on a per-VSAN basis.
C. NPIV requires a "write erase" and then reload the switch in order to come up into NPIV mode.
D. NPIV is a Cisco proprietary feature and as such works only between two Cisco switches.
E. NPIV must not be enabled on a switch that is also running N-port virtualization.
A. 2
B. 3
C. 4
D. 6
E. 12
A. After enabling NPIV, switch interfaces can only be placed into NP, F, or SD modes of operation.
B. NPV devices log in to NPIV devices.
C. NPIV requires the Enterprise License Package.
D. NPIV is supported on the Cisco MDS, N7K, and N5K families of switches.
E. A director class switch should not be placed into NPIV mode.
A. B200
B. C210
C. B250
D. C260
E. C460
A. 800 MHz
B. 900 MHz
C. 1066 MHz
D. 1333 MHz
E. 1666 MHz
最新试题
What interface is created when an FC Port Channel is created on a Cisco Unified Computing System?()
What is the appliance port used to connect to in a Cisco Unified Computing System?()
KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector, to report virtual IP and real server availability. Which statement is true about KAL-AP?()
Application Control Engine (ACE) can check the health of servers and server farms by configuring health probes (which are sometimes referred to as keepalives). A probe can be one of many types. Which are valid ACE probes? ()
Which are valid statements about Cisco Virtual Interface Card (VIC)? ()
When will an "all configuration" backup be imported into the Cisco UCS Manager?()
From the Cisco UCS CLI, how do you verify which uplink ports a blade server is using for its network connectivity?()
Given the following output: san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24:0c:00:0d:ec:d3:5c:00 Admin port mode is NP, trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] : fc2/3 Member[2] : fc2/4 What does "Speed is 8 Gbps" indicate?()
Refer to the exhibit. According to the equipment tab in Cisco UCS Manager, which is true?()
Which statements are true regarding the Cisco UCS fabric failover feature? ()