What would be the cause for the following fault in UCS Manager？（）
"ether VIF x / xxx down， reason： ENM source pinning failed"
A. The associated VLANs of a vNIC are not found on an uplink.
B. Overlapping VLAN IDs exist on upstream disjoint networks.
C. The vNIC was not configured for fabric failover.
D. The vNIC is pinned to the wrong fabric.
E. Overlapping VSAN IDs exist on upstream SAN switches.
F. The vHBA was not configured for failover.
您可能感兴趣的试卷
你可能感兴趣的试题
An administrator is creating a service profile but receives an error when applying to a blade. The administrator checks the faults tab of the service profile and finds the following error （Refer to the exhibit）.
What is the cause of this error？（）
A. vNIC has a Fibre Channel QoS policy assigned
B. vHBA is assigned to a "best-effort" QoS policy
C. vHBA has no QoS policy assigned
D. vHBA is assigned to an incorrect VSAN
E. vNIC has been assigned to an FCoE VLAN
A. A· unique vEthernet interface will be created on Fabric A· and Fabric B·
B. A· vEthernet interface will be created only on Fabric A·
C. A· vEthernet interface will be created on Fabric A·， and move across to Fabric B· in the event of failure
D. Fabric B· will learn the vEthernet interface from Fabric A· through a GARP E· The same vEthernet interface will be created on Fabric A· and Fabric B·
A. An XML file containing all details of the system， including IP address and cluster details
B. A binary file containing only service profiles， pools， and other items configured after initial configuration
C. A binary file containing all details of the system， including IP address and cluster details
D. An XML file containing only service profiles， pools， and other items configured after initial configuration
E. A text file with the NX-OS running configuration
A. Can be used to migrate from a 6120 to a 6140 and retain the same service profiles
B. Can only be used on the fabric interconnect on which it was created
C. Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster information
D. Can be used to match firmware versions between 6120 and 6140 during a migration
A. They are created automatically and stored on the FI
B. They are created manually and exported to a remote server
C. They are automatically scheduled to run every 24 hours
D. They are manually scheduled and stored on the FI
A. During the initial configuration from the console
B. Once the basic configuration has been applied
C. To restore the configuration on a secondary fabric interconnect
D. To upgrade the firmware on a replacement fabric interconnect
A. Only to Cisco Fibre Channel switches
B. Only to Cisco Fibre Channel switches in NPIV mode
C. To any Fibre Channel switch
D. Directly to storage arrays
E. Only to Nexus Switches
A. Under the Admin tab on the FI
B. Under the Server tab in the service profile
C. Under the SAN tab on each VSAN
D. Under the Admin tab on the chassis
E. Under the SAN tab on the Fabric Interconnect
Given the following output：
san-port-channel 12 is up
Hardware is Fibre Channel
Port WWN is 24：0c：00：0d：ec：d3：5c：00
Admin port mode is NP， trunk mode is on
Port mode is NP Port vsan is 1
Speed is 8 Gbps
Member[1] ： fc2/3
Member[2] ： fc2/4
What does "Speed is 8 Gbps" indicate？（）
A. The speed of the slowest interface in the port channel
B. The combined speed of all interfaces configured in the port channel
C. The combined speed of all interfaces in the port channel that are up
D. The speed that can be achieved if all buffers are used
A. Server
B. End device
C. Node
D. Host
E. Virtual
最新试题
What is the purpose of this command in a Cisco Application Control Engine？（） switch/Admin# show np 1 me-stats "-F0 v"
Which three statements are possible causes for the "fltAdaptorHostIfLink-down" fault in UCS Manager？ （）
A Cisco Application Control Engine Appliance （ACE） non-admin context does not support "sticky" configuration. What is the reason for this issue？（）
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
In a Cisco Unified Computing System， What is the "designated receiver" port in end-host mode used for？（）
When testing ICMP access to a functional load-balancing ACE VIP， it fails. What is the reason of this problem？ （）
Which statement is true about "full state backup" in a Cisco Unified Computing System？（）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
In the event of a GSS failure in a GSS cluster， which is true？（）
What is the appliance port used to connect to in a Cisco Unified Computing System？（）