A Cisco switch has this configuration for a port channel connecting to an ESXi using dual NICs and is intended for use with an N1Kv.
Interface fastethernet 1/10
Switchport mode trunk
Switchport trunk allowed vlan all
Channel-group 10 mode on
No shut
Interface fastethernet 1/11
Switchport mode trunk
Switchport trunk allowed vlan all
Channel-group 10 mode on
No shut
Interface port-channel 10
Switchport mode trunk
Switchport allowed vlan all
No shut
Which Port Channel configuration must be used on the Nexus 1000v port-profile？（）
A. MAC pinning
B. Cisco Discovery Protocol pinning
C. Mode On
D. Mode Active
E. No port channel configuration
您可能感兴趣的试卷
你可能感兴趣的试题
A. perform flow lookups
B. intercept packets on service enabled ports
C. run packets through the vPath flow manager
D. classify the packets
E. flow manager emits an action for the packets
F. enforce the action determined by the flow manager
Given the following configuration， what command can be used to determine the physical path that traffic will be sent out upon？（）
Port-profile type Ethernet name vm-data
Switchport mode trunk
Switchport trunk allowed vlan 200-210
Channel-group auto mode on mac-pinning
State enabled
Vmware port-group
No shut
Port-profile type vethernet name vlan-200
Switchport mode access Switchport vlan 200
State enabled Vmware port-group No shut
A. module vem X execute vemcmd show trunk
B. show module 3 internal pinning
C. module vem X execute vemcmd show port
D. show module vem mapping
E. show interface vethX pinning
A. Upstream switch
B. Virtual Supervisor Module
C. VMware distributed switch
D. VMware vSwitch
E. Service virtual machine
A. All vEthernet ports are trusted， and all Ethernet ports such as uplinks and port channels are trusted.
B. All vEthernet ports are not trusted， and all Ethernet ports such as uplinks and port channels are not trusted.
C. All vEthernet ports are trusted and all Ethernet ports such as uplinks and port channels are not trusted.
D. All vEthernet ports are not trusted and all Ethernet ports such as uplinks and port channels are trusted.
n1kv-l3（config）# show lacp offload status
Current Status ： Enabled
Running Config Status ： Enabled
Saved Config Status ： Disabled
What two facts does the output signify？ （）
A. LACP is enabled on the Nexus 1000v.
B. LACP will be offloaded to the upstream switch.
C. LACP will be negotiated to the VM.
D. LACP is negotiated by the VSM.
E. LACP is negotiated by the VEM in all instances.
A. intelligent traffic steering to the VSG
B. offloading the processing from the VSG to the VEM
C. intelligent traffic steering to the VNMC
D. offloading the processing from the VSG to the flow manager
E. deep packet inspection
A. channel-group auto mode on
B. channel-group auto mode active
C. channel-group auto mode on sub-group cdp
D. channel-group auto mode on sub-group manual
E. channel-group auto mode on mac-pinning
A. accounting
B. authentication
C. authorization
D. network monitoring
E. network planning
A. 0
B. 1
C. 2
D. 3
E. 4
F. 5
When configuring vPC-HM CDP with multiple links to the same switch， are port-channels required？（）
A. Each link between the upstream switch and the VEM is an individual subgroup.
B. Connections that go to the same upstream switch must be configured with the command channel-group
C. Connections that go to the same upstream switch must be configured with the command channel-group
D. With vPC-HM CDP， the user can pin traffic from a specific VM to a specific uplink.
E. Connections that go to the same upstream switch must be configured with the command channel-group
最新试题
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true？（）
Refer to the exhibit. According to the equipment tab in Cisco UCS Manager， which is true？（）
KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector， to report virtual IP and real server availability. Which statement is true about KAL-AP？（）
What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）
In the event of a GSS failure in a GSS cluster， which is true？（）
Where are SAN Port Channel is created in UCS Manager？（）
Server load balancing （SLB） is the process of deciding to which server a load-balancing device should send a client request for service. Which predictors are supported on ACE in order to select the best server to fulfill a client request？ （）
Given a Cisco Unified Computing System， which is a valid port type in end-host mode？（）
Which statements are true regarding the Cisco UCS fabric failover feature？ （）