A. Full DNS functionality as a replacement of a DNS
B. Responds to a DNS query with A-record
C. Forwards queries to a name server
D. Multiple A-records
E. DHCP functionality for the local hosts
您可能感兴趣的试卷
你可能感兴趣的试题
A. It is not supported for SSL connections.
B. It is not supported for non-SSL connections.
C. It can only be configured manually.
D. It has a maximum limit of 50,000 replicated connections.
A. ACE sticky license is not installed
B. ACE stickiness is not supported in a non-admin context
C. ACE stickiness resources are not defined in an admin context
D. Stickiness is configured properly in the CCIE virtual context
A. The current connections are rerouted via the backup GSS
B. Secondary GSS cannot be used to configure the GSS cluster
C. All remaining GSSs in the cluster continue responding to any new queries
D. All records in the GSS database are flushed and reconstructed again using a new master GSS
A. Client IP
B. Proxy IP
C. Client and proxy IP
D. Neither client nor proxy IP
A. The interface is shut down
B. An access list is denying ICMP
C. Routing is not configured properly
D. vip icmp-reply is inactive
A. HTTP
B. Java scripting
C. TCL scripting
D. RADIUS
E. TACACS
A. Hash address: Selects the server by using a hash value based on either the source or destination IP address, or both
B. Hash URL: Selects the server by using a hash value based on the requested URL
C. Hash MAC.Selects the server by using a hash value based on either the source or destination MAC address, or both
D. Hash header: Selects the server by using a hash value based on the HTTP header name
E. Hash IP: Selects the server using a hash value based on the IP address
A. UCS-A# show pinning border-interfaces
B. UCS-B# show service-profile circuit
C. UCS-B(nxos)# show pinning server-interfaces
D. You must statically configure which uplink the blades should use, or you will not have connectivity.
A. An interface ’san-port-channel’ in NXOS
B. An interface ’port-channel’ in NXOS
C. An interface ’port-channel’ with ’mode fc’ configured
D. An interface ’fc-port-channel’ in NXOS
A. The fabric interconnects must be in end-host mode.
B. A pin group must be configured on the server tab in Cisco UCS Manager.
C. In the service profile for Server 1, vNIC 1 must be explicitly assigned to a pin group.
D. Server 1 cannot be configured to meet the requirement. A server can only be manually pinned to a single physical interface and not a port channel because of the LACP load-balancing algorithm.
E. Server 1 cannot be configured to meet the requirement. A server is either manually pinned to an uplink on both fabric interconnects or the server is automatically pinned, but not both.
最新试题
Given a Cisco Unified Computing System, which is a valid port type in end-host mode?()
A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types?()
Server load balancing (SLB) is the process of deciding to which server a load-balancing device should send a client request for service. Which predictors are supported on ACE in order to select the best server to fulfill a client request? ()
Given the following output: san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24:0c:00:0d:ec:d3:5c:00 Admin port mode is NP, trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] : fc2/3 Member[2] : fc2/4 What does "Speed is 8 Gbps" indicate?()
A Cisco Application Control Engine Appliance (ACE) non-admin context does not support "sticky" configuration. What is the reason for this issue?()
What would be the cause for the following fault in UCS Manager?() "ether VIF x / xxx down, reason: ENM source pinning failed"
In the event of a GSS failure in a GSS cluster, which is true?()
What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager?()
Which statement is true about "full state backup" in a Cisco Unified Computing System?()
In a Cisco Unified Computing System, What is the "designated receiver" port in end-host mode used for?()