A.increases link capacity
B.increases buffer space to accommodate bursts of traffic from delay-sensitive applications
C.provides prioritized forwarding for drop-sensitive applications
D.drop lower priority packets before congestion occurs
E.separates traffic into as many as 64 queues that can be uniquely prioritized
您可能感兴趣的试卷
你可能感兴趣的试题
A.RTP multiplexing is used to keep multiple phone conversations separate
B.RTP provides end-to-end delivery services for voice traffic
C.UDP is used to ensure a reliable transmission from sender to receiver
D.RTP is used to provide resource reservation for the voice stream
E.UDP provides multiplexing
Refer to the wxhibit . what QOS model should be used to reserve the requested bandwidth and delay needed for each allowed VOIP call regardless of changing networkconditions？（）
A.best-effort delivery
B.ingress committed rate （ICR）
C.shaping and policing
D.egress committed rate （ECR）
E.integrated Services （IntServ）
F.differentiated services （DiffServ）
A.data plane
B.control plane
C.service plane
D.management plane
E.hyper plane
A.determine a minimum bandwidth guarantee
B.determine interfaces to which to apply policy
C.assign priorities to the class
D.configure access control lists
A.a Frame Relay header includes a 1-bit discard eligible （DE） bit to provide the class of service （CoS）
B.an ATM header includes a 1-bit DE field to provide the CoS
C.an MPLS EXP field is inserted in the Layer 3 IP precedence field to identify the CoS
D.the CoS field only exists inside Ethernet frames when 802.1Q or Inter-Switch Link （ISL） trunking is used
E.in the IEEE 802.1p standard， three bits are used to identify the user priority bits for the CoS
F.in the IEEE 802.1q standard， six bits are used to identify the user priority bits for the CoS
A.G711
B.G726
C.G728
D.G729
E.G729A
Refer to the exhibit. What mechanism should be used to increase the bandwidth availability and optimize the link usage throughout the network for voice traffic？（）
A.TCP header compression on router R1
B.TCP header compression on router R2
C.RTP header compression on router R1
D.RTP header compression on router R2
E.payload header compression on router R1
F.payload header compression on router R2
A.in class class-default, replace fair-queue with bandwidth remaining percent 50
B.in class autoqos-transactional-Fa0/1, replace bandwidth remaining percent 40 with bandwidth remaining percent 20
C.in class autoqos-transactional-Fa0/1, replace bandwidth remaining percent 40 with bandwidth remaining percent 30
D.in class autoqos-Bulkl-Fa0/1, replace bandwidth remaining percent 19 with bandwidth remaining percent 25
E.in class autoqos-Scavenger-Fa0/1, replace bandwidth remaining percent 1 with bandwidth remaining percent 10
F.in class autoqos-Signaling-Fa0/1, replace bandwidth remaining percent 4 with bandwidth remaining percent 1
A.the routing protocols being utilized in the network
B.the applications utilizing the network
C.the traffic destinations
D.network addressing scheme
E.cost of implementation
F.the amount of the control needed of the resources
Refer to the exhibit. Both routers have been configured as VoIP gateways. They must also support traditional telephony devices to connect to analog telephones. Which two configuration changes would correctly support the voice requirements?（）
A.on each router， under the dial-peer voice 1 pots configuration， add the port fa0/0 command
B.on each router， under the dial-peer voice 1 pots configuration， add the port 1/0/0 command
C.on each router， configure dial-peer voice 1 as a voip connection and configure dial-peer voice 2 as a pots connection
D.under the dial-peer voice 1 pots configuration， change the destination pattern of 1111 to 2222 on the R1 router， and 2222 to 1111 on the R2 router
E.under the dial-peer voice 2 voip configuration， change the destination pattern of 1111 to 2222 on the R1 router， and 2222 to 1111 on the R2 router
F.under the dial-peer voice 2 voip configuration， change the destination target address of 10.2.2.2 to 10.1.1.1 on the R1 router， and the destination target address of 10.1.1.1 to 10.2.2.2 on the R2 router
最新试题
Which option correctly identifies the four main menus of a Cisco Wireless Control System （WCS）？ （）
Which three functions can an Integrated Services Router perform in a VoIP network？（）
Which statement is true about the Call Admission Control （CAC） feature in VoIP networks？（）
Which two commands should be entered on a WLAN controller to remove any residual configuration？（）
Which three user interfaces exist for the Cisco WLAN Controllers？（）
The Cisco SDM will create a QoS policy that provides services to two types of traffic. Which two statements indicate the default QoS parameters that are created by SDM？（）
Within the WMM policy， how many default QoS radio access categories are there？（）
What are two ways to minimize the delay of VoIP packets that are traversing a network？ （）
In a VoIP network， which type of interface would an analog fax machine connect to？（）
Which three functions are associated with a Cisco Unified CallManager？ （）