A. 8
B. 5
C. 4
D. 3
您可能感兴趣的试卷
你可能感兴趣的试题
A. Resource Reservation Protocol （RSVP）
B. first-in， first-out （FIFO）
C. best-effort
D. CBWFQ
E. IntServ
F. DiffServ
A. Packets can arrive out of order.
B. Packets must take the same path to the destination.
C. Once packets are received at the destination router， the router performs sampling to ensure the quality of the voice traffic.
D. Packets can experience varying delays across the network.
E. Packets containing voice samples are sequentially numbered by default， allowing for reordering upon arrival at the terminal router along the path.
A. Compress payload.
B. Use header compression.
C. Increase link capacity.
D. Use random early detection.
E. Guarantee bandwidth to fragile flows.
F. Implement network-based application recognition.
A. connects traditional telephony devices to voice over IP infrastructure
B. converts analog signals to digital format
C. performs voice compression
D. performs call processing
E. performs dial plan administration
F. performs signaling and device control
A. The rate of traffic is measured and compared to a configured policy.
B. Classification is used to differentiate traffic.
C. Traffic is marked and sent out according to priority.
D. Both can be applied to inbound and outbound traffic.
E. Both buffer traffic to ensure a predetermined traffic rate.
F. Both drop traffic that is above a predetermined traffic rate.
A. In a Frame Relay network， delay sensitive traffic is tagged with the discard eligible （DE） bit.
B. In an MPLS network， the three most significant bits of the DSCP or the IP precedence of the IP packet are copied into the MPLS EXP field.
C. In an MPLS network， the MPLS EXP bits are used to identify up to 16 CoS values.
D. The differentiated services code point （DSCP） field consists of the first three bits of the IP precedence field in the header of an IP packet.
E. The 802.1Q standard uses a three bit field referred to as the user priority bits （PRI） to mark packets as belonging to a specific CoS.
A. packetization
B. quantization
C. decoding
D. sampling
A. to eliminate the need for VoIP gateways
B. to scale a VoIP installation with multiple gateways
C. to provide call admission control and limit the number of simultaneous calls on the network
D. to meet the requirement to control H·323 gateways on a LAN
E. to accept call requests and reduce the load on the gateway
A. codec
B. link speed
C. Layer 2 encapsulation
D. packet overhead （IP/UDP/RTP）
E. link delay
F. total number of simultaneous calls that are allowed
A. Use WFQ， CBWFQ， and LLQ to prioritize delay-sensitive packets.
B. Use WFQ， CBWFQ， and LLQ to compress the payload.
C. Give TCP packets priority over UDP packets.
D. Use control plane policing for cRTP queuing.
E. Use stacker and predictor to compress the payload.
最新试题
When deploying a Cisco Wireless Control System （WCS） with the 2700 series location appliance， to within what range is on-demand location of rogue APs possible？（）
Which three practices are important to the implementation of a DiffServ QoS architecture？（）
In a VoIP network， which type of interface would an analog fax machine connect to？（）
Which three functions can an Integrated Services Router perform in a VoIP network？（）
In the design of a QoS solution， which two factors should be taken into consideration？（）
What is an advantage of the IntServ QoS model？（）
Which two QoS classification and marking statements are true？ （）
End-to-end QoS is maintained in the Cisco WLAN deployment model by utilizing what parameter in lieu of 802.1p？（）
Which statement is true about the Call Admission Control （CAC） feature in VoIP networks？（）
What are three Cisco Unified CallManager features？ （）