A. Compress payload.
B. Use header compression.
C. Increase link capacity.
D. Use random early detection.
E. Guarantee bandwidth to fragile flows.
F. Implement network-based application recognition.
您可能感兴趣的试卷
你可能感兴趣的试题
A. connects traditional telephony devices to voice over IP infrastructure
B. converts analog signals to digital format
C. performs voice compression
D. performs call processing
E. performs dial plan administration
F. performs signaling and device control
A. The rate of traffic is measured and compared to a configured policy.
B. Classification is used to differentiate traffic.
C. Traffic is marked and sent out according to priority.
D. Both can be applied to inbound and outbound traffic.
E. Both buffer traffic to ensure a predetermined traffic rate.
F. Both drop traffic that is above a predetermined traffic rate.
A. In a Frame Relay network, delay sensitive traffic is tagged with the discard eligible (DE) bit.
B. In an MPLS network, the three most significant bits of the DSCP or the IP precedence of the IP packet are copied into the MPLS EXP field.
C. In an MPLS network, the MPLS EXP bits are used to identify up to 16 CoS values.
D. The differentiated services code point (DSCP) field consists of the first three bits of the IP precedence field in the header of an IP packet.
E. The 802.1Q standard uses a three bit field referred to as the user priority bits (PRI) to mark packets as belonging to a specific CoS.
A. packetization
B. quantization
C. decoding
D. sampling
A. to eliminate the need for VoIP gateways
B. to scale a VoIP installation with multiple gateways
C. to provide call admission control and limit the number of simultaneous calls on the network
D. to meet the requirement to control H·323 gateways on a LAN
E. to accept call requests and reduce the load on the gateway
A. codec
B. link speed
C. Layer 2 encapsulation
D. packet overhead (IP/UDP/RTP)
E. link delay
F. total number of simultaneous calls that are allowed
A. Use WFQ, CBWFQ, and LLQ to prioritize delay-sensitive packets.
B. Use WFQ, CBWFQ, and LLQ to compress the payload.
C. Give TCP packets priority over UDP packets.
D. Use control plane policing for cRTP queuing.
E. Use stacker and predictor to compress the payload.
A. programming interface to external applications
B. FXS and FXO port negotiation
C. AutoQos VoIP trust boundaries
D. signaling and device control
E. LLQ for voice and video traffic
F. directory and XML services
A. link efficiency
B. admission control
C. classification and marking
D. shaping and policing
E. congestion avoidance using the RTP protocol
F. resource reservation using the RSVP protocol
A. H·323
B. UDP
C. RTP
D. TCP
E. Media Gateway Control Protocol (MGCP)
F. session initiation protocol (SIP)
最新试题
Within the WMM policy, how many default QoS radio access categories are there?()
Which two statements are correct about the signaling methods that are utilized for transmitting voice? ()
When QoS levels in the Cisco Wireless Control System (WCS) are entered, which profile names are used to identify the access categories?()
SDM creates a low latency queuing (LLQ) service policy with its associated classes. What are the two types of low latency queuing available using the SDM QoS wizard?()
Which three user interfaces exist for the Cisco WLAN Controllers?()
In the design of a QoS solution, which two factors should be taken into consideration?()
What is the term that is used to describe the process of converting a signal from digital to analog?()
What is an advantage of the IntServ QoS model?()
Which three functions are associated with a Cisco Unified CallManager? ()
In a VoIP network, which type of interface would an analog fax machine connect to?()