A.Asynchronous Transfer Mode （ATM）
B.data-link switching （DLSw）
C.Route Processor Redundancy （RPR）
D.Frame Relay （FR）
E.Metro Ethernet
F.Multiprotocol Label Switching （MPLS）
您可能感兴趣的试卷
你可能感兴趣的试题
A.a class can be identified as a single application， multiple applications with similar service needs，or be based on the source or destination IP address
B.a drawback of the DiffServ field in the MAC header to mark frames into behavior aggregates （BAs）
C.DiffServ uses the DiffServ field in the MAC header to mark frames into behavior
D.the DiffServ field occupies the same eight bits of the MAC header that were previously used for the ToS field
E.the first six high-order bits of the DiffServ field are used to identify the Resource Reservation Protocol （RSVP） value
F.the primary goal of DiffServ is scalability
A.FECN
B.LLQ
C.WRED
D.LFI
E.CRTP
F.CBWFQ
A.Cisco CallManager
B.Cisco CallManger Express （CME）
C.Cisco CallManager Gateway （CMG）
D.Cisco CallManager Voice Gateway （CMVG）
E.Media Gateway Control Protocol （MGCP）
A.increases link capacity
B.increases buffer space to accommodate bursts of traffic from delay-sensitive applications
C.provides prioritized forwarding for drop-sensitive applications
D.drop lower priority packets before congestion occurs
E.separates traffic into as many as 64 queues that can be uniquely prioritized
A.RTP multiplexing is used to keep multiple phone conversations separate
B.RTP provides end-to-end delivery services for voice traffic
C.UDP is used to ensure a reliable transmission from sender to receiver
D.RTP is used to provide resource reservation for the voice stream
E.UDP provides multiplexing
Refer to the wxhibit . what QOS model should be used to reserve the requested bandwidth and delay needed for each allowed VOIP call regardless of changing networkconditions？（）
A.best-effort delivery
B.ingress committed rate （ICR）
C.shaping and policing
D.egress committed rate （ECR）
E.integrated Services （IntServ）
F.differentiated services （DiffServ）
A.data plane
B.control plane
C.service plane
D.management plane
E.hyper plane
A.determine a minimum bandwidth guarantee
B.determine interfaces to which to apply policy
C.assign priorities to the class
D.configure access control lists
A.a Frame Relay header includes a 1-bit discard eligible （DE） bit to provide the class of service （CoS）
B.an ATM header includes a 1-bit DE field to provide the CoS
C.an MPLS EXP field is inserted in the Layer 3 IP precedence field to identify the CoS
D.the CoS field only exists inside Ethernet frames when 802.1Q or Inter-Switch Link （ISL） trunking is used
E.in the IEEE 802.1p standard， three bits are used to identify the user priority bits for the CoS
F.in the IEEE 802.1q standard， six bits are used to identify the user priority bits for the CoS
A.G711
B.G726
C.G728
D.G729
E.G729A
最新试题
Which statement is true about the Call Admission Control （CAC） feature in VoIP networks？（）
Which three practices are important to the implementation of a DiffServ QoS architecture？（）
End-to-end QoS is maintained in the Cisco WLAN deployment model by utilizing what parameter in lieu of 802.1p？（）
SDM creates a low latency queuing （LLQ） service policy with its associated classes. What are the two types of low latency queuing available using the SDM QoS wizard？（）
What can be used to maintain the voice quality on a link by limiting the number of calls that can be active at any given time？（）
What are the three models of quality of service （QoS） in a network？（）
What are three factors used to determine the amount of bandwidth that is required for a single VoIP call？ （）
Which two VoIP capabilities are utilized when the CallManager and the gateway are configured for Survivable Remote Site Telephony？（）
Which three functions can an Integrated Services Router perform in a VoIP network？（）
Which two functions can be provided by an Integrated Services Router （ISR） in a VoIP network？（）