A. 802.3ad
B. 802.1w
C. 802.1Q
D. 802.1d
您可能感兴趣的试卷
你可能感兴趣的试题
A. show secure
B. show file systems
C. show flash
D. show version
A. Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B. Gateway-Router is configured to only receive RIPv2 updates.
C. Gateway-router is configured to receive only RIPv1 updates.
D. Branch-Router1 is configured to only send RIPv1 updates
A. 172.16.0.0/18
B. 172.16.0.0/16
C. 172.16.0.0/20
D. 172.16.0.0/21
A. 2 through 1001
B. 1 through 1001
C. 1 through 1002
D. 2 through 1005
A. (config-if)#authentication ppp chap fallback ppp
B. (config-if)#authentication ppp chap pap
C. (config-if)#ppp authentication chap pap
D. (config-if)#ppp authentication chap fallback ppp
A. Bandwidth,Delay,and MTU
B. Bandwidth
C. Bandwidth and MTU
D. Bandwidth , MTU,Reliability,Delay,and Load
A. reflexive
B. extended
C. standard
D. dynamic
A. redundant
B. spanned
C. provisioned
D. converged
A. NCP
B. LCP
C. ISDN
D. DLCI
E. SLIP
A. 10.188.31.0/27
B. 10.188.31.0/26
C. 10.188.31.0/29
D. 10.188.31.0/28
E. 10.188.31.0/25
最新试题
What is the subnetwork address for a host with the IP address 201.100.5.68/28?()
The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?()
Which cisco ios command can help to determine the timing of various debug events,relative to each other,when you are debugging a complicated router issue?()
What is the purpose of the cisco Vlan Trunking protocol?()
Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers?()
After the show ip route command has been entered,the follwing routes are displayed.Which route will not be entered into the routing table of a neighboring router?()
Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?()
What is the default administrative distance of OSPF?()
Which address is the IPV6 all-RIP-routers muticast group address that is used by RIPng as the destaion address?()
How are VTP advertisements delivered to switches across the network?()