A. Before they are routed to an outbound interface.
B. After they are routed for outbound traffic.
C. After they are routed to an outbound interface while queuing.
D. Before and after they are routed to an outbound interface.
E. Depends on the configuration of the interface
F. None of the above
您可能感兴趣的试卷
你可能感兴趣的试题
A. To configure a route to the first Layer 3 device on the network segment.
B. To configure a route from an ISP router into a corporate network.
C. To configure a route when the administrative distance of the current routing protocolis too low.
D. To reach a network is more than 15 hops away.
E. To provide access to the Internet for enterprise hosts.
A. router(config)# ip route 0.0.0.0 10.1.1.0 10.1.1.1
B. router(config)# ip default-route 10.1.1.0
C. router(config)# ip default-gateway 10.1.1.0
D. router(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.1
A.
B.
C.
D.
E.
F.
A. It is globally enabled by default on Cisco routers.
B. It is globally enabled by default on all routers.
C. It is a proprietary protocol.
D. It is a non-proprietary protocol.
E. It can be used to gather hardware and protocol information about neighbor devices.
A. The Frame Relay encapsulation on the physical interface.
B. The local DLCI on each subinterface.
C. An IP address on the physical interface.
D. The subinterface type as point-to-point.
A.close
B.disable
C.disconnect
D.suspend
E.exit
F.None of the above
The Testking Network consists of the following 5 IP networks:
NETWORK 1: 192.168.10.0/26
NETWORK 2: 192.168.10.64/27
NETWORK 3: 192.168.10.96/27
NETWORK 4: 192.168.10.128/30
NETWORK 5: 192.168.10.132/30
Which of the following routing protocols will support this IP addressing scheme?()
A. RIP version 1
B. RIP version 2
C. IGRP
D. EIGRP
E. OSPF
F. BGP
A. CIDR
B. Split horizon
C. Authentication
D. Classless masking
E. Hold-down timers
F. Multicast routing updates
G. Path Vectoring
You need to implement the use of a routing protocol that meets the following
requirements:
1. Converges quickly
2. Supports VLSM, CIDR, IP, and IPX.
3. Uses minimal bandwidth for routing updates.
Which one of the following routing protocols would be the best choice?()
A. RIPv1
B. RIPv2
C. IGRP
D. OSPF
E. EIGRP
A. RIPv1
B. IGRP
C. EIGRP
D. OSPF
E. IS-IS
F. RIPv2
最新试题
What does a configuration Register Setting of 0x2105 indicate to the Router? ()
Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. ()
Which of the following host addresses are member of networks that can be routed across the public Internet? ()
Which of the following options lists the steps in PPP session establishment in the correct order?()
Which Frame Relay feature is responsible for transmitting keepalives to ensure that the PVC does not shut down because of inactivity?()
Which connections allow the use of full-duplex Ethernet?()
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?()
Which of the following describe router functions?()
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? ()
Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts?()