A. Switch(config-if)# vlan all
B. Switch(config-if)# switchport trunk encapsulation dot1q
C. Switch(config-if)# switchport access vlan all
D. Switch(config-if)# switchport mode trunk
E. Switch(config-if)# switchport access vlan 303
您可能感兴趣的试卷
你可能感兴趣的试题
A. Configuration register
B. NVRAM
C. Boot flash
D. CMOS
E. Flash
A. Perform POST, locate configuration statements, apply configuration statements, locate Cisco IOS software, and load Cisco IOS software.
B. Locate Cisco IOS software, load Cisco IOS software, locate configuration statements, apply configuration statements, and perform POST.
C. Test software routines, POST, load configuration files, load Cisco IOS software, test Cisco IOS software.
D.POST, locate Cisco IOS software, load the Cisco IOS software, locate configuration statements, and apply configuration statements.
E. Load and test IOS, load configuration files, test software routines, POST.
You are unable to connect to the TESTKING1 router. Which of the following command sequences will correct this problem?（）
A.
B.
C.
D.
E.
F.
You want the text "Unauthorized access prohibited!" to be displayed before the login prompt every time someone tries to initiate a Telnet session to a router, as shown in the example below:
Which command can be used to configure this message?（）
A. login banner x Unauthorized access prohibited! X
B. banner exec y Unauthorized access prohibited! Y
C. banner motd x Unauthorized access prohibited! X
D. vtv motd "Unauthorized access prohibited!"
The TestKingA router is configured as shown below:
TestKingA(config)# interface loopback 0
TestKingA(config-if)# ip address 192.168.16.24 255.255.255.255
As a result of this change, which of the statements below are true?（）
A. It creates a virtual, software only, interface.
B. It provides a way to test the convergence of OSPF routing updates.
C. The mask of 255.255.255.255 is called a host mask.
D. It uses a wildcard mask of 255.255.255.255.
E. It ensures that an interface is always active for OSPF processes.
F. Loopback interfaces must be numbered 0.
A CCNA candidate is working on a 2600 Cisco router. The person needs to verify that the configuration register is set to boot the router IOS from flash memory and use the commands saved in the startup-configuration file.
Which command will display this information, and what is the configuration register value that should be displayed?（）
A. show startup-config and 0x2142
B. show version and 0x2102
C. show flash and 0x2102
D. show version and 0x2142
E. show running-config and 0x2142
F. show flash and 0x2142
A. Make sure that the server can be reached across the network.
B. Check the authentication for TFTP access to the server is set.
C. Assure that the network server as adequate space for the IOS image.
D. Verify file naming and path requirements.
E. Make sure that the server can store binary files.
F. Adjust the TCP window size to speed up the transfer.
A Cisco router has been configured, and the copy running-config startup-config command has been issued. When the router is power cycled, the router prompts with:
"Would you like to enter the initial configuration dialog? [yes/no]"
Why has this occurred?（）
A. There is an error in the router DRAM.
B. Te IOS image is corrupt.
C. The configuration register is set to 0x2142.
D. The TFTP server that contains the router configuration file is unreachable.
E. A boot system configuration command has placed the router into setup mode.
A. TestKingB#reload
B. TestKingB# copy tftp startup-config
C. TestKingB# copy startup.-config running-config
D. TestKingB# copy running-config flash
E. TestKingB# setup
Exhibit: The following are true with one of the TestKing routers:
1) The IOS image in flash is missing
2) No Network connectivity is available.
3) The router fallback IOS image is corrupt.
How will this Cisco 2600 series router respond if the conditions listed in the exhibit exist during the boot process?（）
A. The router will enter setup mode.
B. The router will enter ROM monitor mode.
C. The router will enter global configuration mode.
D. The boot will hang until an IOS is available.
最新试题
All WAN links is side the TestKing.com network use PPP with for authentication security. Which command will display the CHAP authentication process as it occurs between two routers in the network?（）
What is the subnetwork address for a host with IP address 201.100.5.68/28?（）
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）
What feature of a networks switch allows an administrative to create separate broadcast domains?（）
Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）
Which of the following contribute to congestion on an Ethernet network?（）
Which of the following correctly describe steps in the OSI data encapsulation process?（）
Which Frame Relay feature is responsible for transmitting keepalives to ensure that the PVC does not shut down because of inactivity?（）
Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts?（）
What is the purpose of typing o/r 0x2142 during a password recover procedure on a 2500 series router?（）