A.SSL
B.SLIP
C.PAP
D.LAPB
E.CHAP
F.VNP
您可能感兴趣的试卷
你可能感兴趣的试题
A. TestKRouter(config-if)# Encapsulation frame-relay dot1q
B. TestKRouter(config-if)# Encapsulation frame-relay aal5snap
C. TestKRouter(config-if)# Encapsulation frame-relay ietf
D. TestKRouter(config-if)# Encapsulation frame-relay isl
E. None of the above
A. frame-relay arp
B. frame-relay map
C. frame-relay interface-dlci
D. frame-relay lmi-type
E. frame-relay pvc
A. The local DLCI on each subinterface of the Frame Relay.
B. The Frame Relay encapsulation on the physical interface.
C. An IP address on the physical interface.
D. The subinterface type as point-to-point
A. Router# ping 192.168.13.26
B. Router# debug access-list 172
C. Router# show open ports 192.168.13.26
D. Router# show access-list
E. Router# show ip interface
You are the network administrator at TestKing. You apply the following access list on the E0 outbound interface connected to the 192.168.1.8/29 LAN:
access-list 21 deny tcp 192.168.1.8 0.0.0.7 eq 20 any
access-list 21 deny tcp 192.168.1.8 0.0.0.7 eq 21 any
What will the effect of this access list be?（）
A. All traffic will be allowed to out of E0 except FTP traffic.
B. FTP traffic from 192.168.1.22 to any host will be blocked.
C. FTP traffic from 192.168.1.9 to any host will be blocked.
D. All traffic will be prevented from leaving E0.
E. All FTP traffic to network 192.168.1.9/29 from any host will be blocked.
A. access-list 101 deny tcp 192.168.1.128 0.0.015 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
B. access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
C. access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any any
D. access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
E. access-list 101 deny ip 192.168.1.128 0.0.0.240 192.158.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
F. access-list 101 deny ip 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
A. You should place standard ACLS as close as possible to the source of traffic to be denied.
B. You should place extended ACLS as close as possible to the source of traffic to be denied.
C. You should place standard ACLS as close as possible to the destination of traffic to be denied.
D. You should place extended ACLS should be places as close as possible to the destination of traffic to be denied.
A. RouterTK(config-line)# access-class 10 in
B. RouterTK(config-if)# ip access-class 23 out
C. RouterTK(config-line)# access-list 150 in
D. RouterTK(config-if)# ip access-list 128 out
E. RouterTK(config-line)# access-group 15 out
F. RouterTK(config-if)# ip access-group 110 in
Study the information and the relevant configuration file below for the Testking Branch router
What additional command must be executed on the Branch router before interesting traffic will initiate an ISDN call?（）
A. (config-if)# dialer-group 1
B. (config-if)# dialer-list 1
C. (config-if)# dialer map 1
D. (config-if)# dialer-route 1
The following access list below was applied outbound on the E0 interface connected to the 192.169.1.8/29 LAN:
How will the above access lists affect traffic?（）
A. FTP traffic from 192.169.1.22 will be denied.
B. No traffic, except for FTP traffic will be allowed to exit E0.
C. FTP traffic from 192.169.1.9 to any host will be denied.
D. All traffic exiting E0 will be denied.
E. All FTP traffic to network 192.169.1.9/29 will be denied.
最新试题
What does a configuration Register Setting of 0x2105 indicate to the Router? （）
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? （）
What is a global command?（）
Which characteristics are representative of a link-state routing protocol?（）
A router with a serial interface will be used for an ISDN link.What other function group devices are required to complete the connection to the service provider? （）
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）
Which of the following describe router functions?（）
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? （）
Which command is used to display the placement and direction of an IP access control list on a router?（）
What is the subnetwork address for a host with IP address 201.100.5.68/28?（）