Out of which port on Sw-Ac3 would a frame containing an IP packet with a destination address that is not on a local LAN be forwarded?（）
A.Fa0/1
B.Fa0/3
C.Fa0/4
D.Fa0/8
E.Fa0/9
F.Fa0/12
您可能感兴趣的试卷
你可能感兴趣的试题
What interface did Sw-AC3 associate with source MAC address 0010.5a0c.ffba?（）
A.Fa0/1
B.Fa0/3
C.Fa0/6
D.Fa0/8
E.Fa0/9
F.Fa0/12
What address should be configured as the default-gateway for the host connected to interface Fa0/4 of Sw-AC3?（）
A.192.168.1.254
B.192.168.22.254
C.192.168.33.254
D.192.168.44.254
A. Connect the PC's COM port to the router's console port using a straight-through cable.
B. Connect the PC's COM port to the router's console port using a rollover cable.
C. Connect the PC's COM port to the router's ethernet port using a straight-through cable.
D. Connect the PC's ethernet port to the router's ethernet port using a rollover cable.
E. Connect the PC's ethernet port to the router's ethernet port using a straight- through cable.
A. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
B. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C. C 192.168.1.0/24 is directly connected, Ethernet0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
A. It configures a router to send all packets out interface serial 0/0.
B. It configures a router to block routing updates from being sent out interface serial 0/0.
C. It configures a router as a firewall, blocking all unauthorized packets from exiting serial 0/0.
D. It configures a router to send all packets for unknown destination networks out interface serial 0/0.
E. It configures a router to drop all packets for which the destination network is unknown.
A. It is used to validate the sources of VTP advertisements sent between switches.
B. It is used to access the VTP server to make changes to the VTP configuration.
C. It allows two VTP servers to exist in the same domain, each configured with different passwords.
D. It is the password required when promoting a switch from VTP client mode to VTP server mode.
E. It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.
A company is experiencing network delays. The network administrator discovers that a worker in a location far from the MDF has connected an old 10BASE-T switch with redundant links to the existing network.
How could this action be responsible for the impaired network performance?（）
A. Connecting a host to the old switch has created a broadcast storm.
B. The 10BASE-T switch forced the entire network to be reduced to 10 Mbps operation.
C. The old switch does not support VLANs, which has disabled the VLAN configuration of the entire the network.
D. The old switch does not support full-duplex operation, effectively forcing half-duplex operation throughout the network.
E. Spanning Tree Protocol has elected the old switch as the root bridge, creating inefficient data paths through the switched network.
A.DHCP
B.SMTP
C.SNMP
D.FTP
E.HTTP
F.TFTP
A. Denmark exchanges with Utah, Paris, and Berlin.
B. Utah exchanges only with Denmark.
C. Berlin exchanges with Denmark, Utah, and Paris.
D. Paris exchanges only with Denmark.
E. Denmark exchanges with only Paris and Utah.
A. Individual statements in a named access list may be deleted.
B. They require a numbered range from 1000 to 1099.
C. When created, they must be specified as standard or extended.
D. They are created with the ip access-list command.
E. The entire access list must be deleted before editing.
F. They are applied with the ip name-group command.
最新试题
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? （）
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? （）
Which of the following statements regarding routed and routing protocols are true?（）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）
Which of the following if addresses can be assigned to host devices?（）
What is the subnetwork address for a host with IP address 201.100.5.68/28?（）
What does a configuration Register Setting of 0x2105 indicate to the Router? （）
What feature of a networks switch allows an administrative to create separate broadcast domains?（）
Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）