A. The switch name must match the workgroup name of the local network.
B. The switch must be configured with an IP address and default gateway.
C. The remote workstations must have access to the management VLAN of the switch.
D. CDP must be enabled on the switch so that it can be located by other devices on the network.
您可能感兴趣的试卷
你可能感兴趣的试题
A. show access-list
B. show ip route
C. show ip interface
D. show interface
E. show interface list
F. show ip interface brief
A. To restart the router.
B. To bypass the configuration in NVRAM.
C. To view the lost password.
D. To save the changes to the configuration.
E. To enter ROM Monitor mode.
A. cut-through
B. fragment-free
C. frame-filtering
D. store-and-forward
E. 802.1q forwarding
F. VTP transparent mode
A.255.255.254.0
B.255.255.254.1
C.255.255.254.2
D.255.255.254.3
A. TE1
B. TE2
C. TA
D. NT1
E. NT2
A. Router# show protocols
B. Router# show version
C. Router# show image
D. Router# show IOS
E. Router# show flash
A.15.234.118.63
B.92.11.178.93
C.134.178.18.56
D.192.168.16.87
E.201.45.116.159
F.217.63.12.192
A. 10.172.13.65
B. 172.16.223.125
C. 172.64.12.29
D. 192.168.23.252
E. 198.234.12.95
F. 212.192.48.254
A. Switch to host
B. Switch to switch
C. Hub to hub
D. Switch to hub
E. Host to host
A. To restart the router.
B. To bypass the configuration in Flash.
C. To view the password before changes are made.
D. To bypass setup configuration mode.
E. To access ROM Monitor mode.
最新试题
A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?()
Which characteristics are representative of a link-state routing protocol?()
What is the purpose of typing o/r 0x2142 during a password recover procedure on a 2500 series router?()
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?()
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? ()
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? ()
Which connections allow the use of full-duplex Ethernet?()
Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. ()
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? ()
Which of the following contribute to congestion on an Ethernet network?()