A.Install a longwave GBIC in the office SAN switch and string a multimode fibre from the office to the manufacturing floor
B.Install a longwave GBIC in the office SAN switch and string a singlemode fibre from the office to the manufacturing floor
C.Install a shortwave GBIC in the office SAN switch and string a multimode fibre from the office to the manufacturing floor
D.Install a shortwave GBIC in the office SAN switch and string a singlemode fibre from the office to the manufacturing floor
您可能感兴趣的试卷
你可能感兴趣的试题
A.Use write-back cache with battery backup enabled
B.Use write-through cache with battery backup enabled
C.Use read-back cache with battery backup enabled
D.Use read-through cache with battery backup enabled
A.Place both the database and transaction log on two logical drives in one RAID-10 array
B.Place both the database and transaction log on two logical drives in one RAID-1E array
C.Place the database on a RAID-1E array and place the transaction log on a separate RAID-5 array
D.Place the database on a RAID-5 array and place the transaction log on a separate RAID-1E array
A.Seek Time
B.Drive RPM
C.Data Transfer Rate
D.Rotational Latency
A.Disable the ServRAID cache
B.Change the RAID level to 10
C.Change the cache level to Write Through
D.Add five more drives to the array to increase the number of read/write heads
A.NAS runs on 2Gb fibre, which will provide better performance.
B.NAS uses WAN infrastructure, which can easily span the 1 KM gap.
C.NAS requires fibre storage, which allows dual paths for redundancy.
D.NAS requires iSCSI routers and offers better growth environment.
A.The ability to interleave writes to the array
B.High Availability and failover
C.LUN sharing via Target Mode SCSI on the storage system
D.A greater number of LUNS available on the same storage system
A.Change the stripe size on the RAID controller
B.Change the stripe size to 1024K on the RAID controller
C.Change the stripe size on the RAID controller for the first array
D.Change the stripe size on the RAID controller for the second array
A.Amount of data in the backup
B.Bandwidth available to the tape device
C.Length of the backup/restore window
D.Speed that the backup system can find files for restoration
A customer wants to hold all enterprise data on their DS4000 system. Several servers were added after they purchased another company. The servers that have to be run are:
(1)An Oracle database running on a HP-UX server
(2)Several virtual machines running on VMWare ESX server
(3)A Microsoft cluster running Exchange 2000 server
Which of these new servers can be integrated with the DS4000?()
A.DS4000 storage does not support HP-UX, so the HP-UX server cannot be integrated.All other new servers can be used.
B.An Exchange cluster needs local disks, so the DS4000 cannot be used for this.All other new servers can be used.
C.When equipped with proper HBA’s and subsystem device drivers, all new servers can operate with the DS4000 storage device.
D.VMWare ESX can use the DS4000 storage; however, the virtual machines running in it will not have access to this storage other than via a virtual disk.All other new servers can be used.
A.RAID-5 with cache write back
B.RAID-1E with cache write back
C.RAID-10 with cache write thru
D.RAID-50 with cache write thru
最新试题
An xSeries specialist monitors a customer’s server that has poor performance. The customer is running an x365 with a ServeRAID 6i controller with write-back cache turned on and ten 15K rpm drives in a RAID-5 array. It is a mission-critical server and must have a redundant storage system. Performance tests indicate that the Average Disk sec/Transfer exceeds 20 ms. Which of the following is the lowest-cost method to increase the throughput?()
A customer is experiencing a performance bottleneck. The server is performing sequential I/O requests with large block sizes of 64KB. Improving which of the following storage subsystem characteristics has the biggest impact on this bottleneck?()
A startup company recently lost their critical database due to hardware failure on a Windows 2003 4-way processor server running 32-bit applications and an out-dated backup due to a narrow backup window. To prevent this situation from happening again, the solution proposed must be cost effective, scale to 16-way and allow for future storage expansion. Which TWO of the following options should the consultant recommend?()
Which of the following is the benefit of installing two expandability cables to an RXE-100 from an x445?()
A customer’s server is experiencing slow application response due to lack of processor power. In which one of the following systems would the addition of the Expand On Demand processor upgrade feature benefit future expansion?()
Attaching to a SCSI storage system through redundant paths will provide which of the following?()
The statistics for a poorly performing, dual-processor x365 system are as follows: (1)Processor: 80% for 5-second increments (2)Memory page faults: 360/second average over 15 minutes (3)Disk % disk time: 100% Which of the following will provide the greatest performance improvement?()
A customer needs to install a database on a server. Which of the following statements describes how to modify the RAID configuration for optimal performance?()
A company wants to run multiple applications on an x445 to serve their user base. OS and application licensing cost is a factor. Which TWO questions will help the specialist decide on the operating environment and the number of processors per server?()
A company has two x346 servers each attached to their own EXP400 containing 367GB of raw SCSI storage. They want to consolidate their storage infrastructure into a scalable, high availability solution at minimum cost. Which of the following storage solutions best satisfies the customer’s requirements?()