A.RAID-5 with cache write back
B.RAID-1E with cache write back
C.RAID-10 with cache write thru
D.RAID-50 with cache write thru
您可能感兴趣的试卷
你可能感兴趣的试题
The statistics for a poorly performing, dual-processor x365 system are as follows:
(1)Processor: 80% for 5-second increments
(2)Memory page faults: 360/second average over 15 minutes
(3)Disk % disk time: 100%
Which of the following will provide the greatest performance improvement?()
A.Add memory
B.Add a processor
C.Exchange the existing processor for a faster processor
D.Add a faster disk subsystem
A.Higher availability of the enclosure
B.Access to both channels of the RXE-100
C.Support for more PCI-X 133MHz I/O cards
D.Improved management of the Drawer Management Controller in the RXE-100
A.Replace the two 3.0 GHz DP processors with four 3.0GHz MP processors with a 4MB L3 cache and 4GB of RAM
B.Replace the x445 with an x366 with four 3.66 EM64T processors with a 1MB L2 cache and 4GB of RAM
C.Replace the two 3.0GHz DP processors with two 3.0GHz MP processors with a 4MB L3 cache and 2GB RAM
D.Replace the two 3.0GHz DP processors with four 3.0 GHz DP processors with a 512KB L2 cache and 4GB RAM
A.An x255 with 4 processors
B.An x365 with 4 processors
C.An x445 with 4 processors
D.An x445 with 32 processors
A FastT Host FC-2 bus adapter, a U320 SCSI adapter, and three 10/100Mb Ethernet adapters have to be installed as optimally as possible. This is going to be a 24X7 system. The addition of extra PCI-cards is a major consideration as well. Based on the following, what is the best configuration?()
(1)Slot 1 66MHz Bus 1
(2)Slot 2 66MHz Bus 1
(3)Slot 3 100MHz Bus 2
(4)Slot 4 100Mhz Bus 2
(5)Slot 5 133Mhz Bus 3
(6)Slot 6 133Mhz Bus 3
A.Put the Ethernet adapters in slots 1, 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 6.
B.Put the Ethernet adapters in slots 1, 4 and 6. Put the FastT HBA in slot 5. Put the U320 adapter in slot 3.
C.Put the Ethernet adapters in slots 1, 2 and 4. Put the FastT HBA in slot 3. Put the U320 adapter in slot 5.
D.Put the Ethernet adapters in slots 1, 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 4
A.It places frequently accessed data close to the processor to help deliver faster performance.
B.It replaces L3 cache memory.
C.It speeds up processor performance by purging the current set of instructions and freeing them up to work on the next set of instructions.
D.It allows the system to address more than 16GB of memory.
A.With XA-32 architecture, addressing more than 64GB of RAM can be installed.
B.The amount of memory should be balanced across ports for best performance.
C.All DIMM slots should be populated in numerical order - slot 1 before slot 2, slot 2 before slot 3, etc.
D.All even number DIMM slots should be populated before odd number DIMM slots.
A.Begin with a dual DP x445 and scale in the same chassis
B.Begin with a dual MP x445 and scale in the same chassis
C.Begin with a dual DP x445 and scale out in an extra chassis
D.Begin with a dual MP x365 and scale to a different machine
A.x445 with four Xeon DP processors and 16GB of memory in a single SMP module
B.x445 with four Xeon MP processors and 16GB of memory in a single SMP module
C.x445 with two SMP modules each containing two Xeon DP processors and 8GB of memory
D.x445 with two SMP modules each containing two Xeon MP processors and 8GB of memory
A.Memory Mirroring must be enabled in the BIOS.
B.Redundant bit steering must be enabled in the BIOS.
C.DIMMs must be the same size and speed as the DIMMs being replaced.
D.Memory Mirroring must be enabled in the operating system.
E.DIMMs can be of same size or larger or same speed or faster.
最新试题
A manufacturing company has a large facility which has its offices at one end and a manufacturing floor at the other. The company is looking to implement new equipment that requires access to the company’s SAN that is over 2.4 kilometers away in the office area. Which of the following solutions will satisfy this requirement?()
A company wants to run multiple applications on an x445 to serve their user base. OS and application licensing cost is a factor. Which TWO questions will help the specialist decide on the operating environment and the number of processors per server?()
Which of the following is a function of the XceL4 Cache?()
A customer needs to install a database on a server. Which of the following statements describes how to modify the RAID configuration for optimal performance?()
A customer has the need to implement a tape backup solution to backup a 500GB database on a daily basis. Which of the following factors is the most important consideration in the design of a backup and restore solution?()
A customer has a database application that is accessed by a large number of people through a web interface from multiple remote locations. Which of the following questions will provide the information necessary to design the best performing storage solution?()
Attaching to a SCSI storage system through redundant paths will provide which of the following?()
A customer has a requirement for a server to run Windows Server 2003 Enterprise Edition and Exchange 2003 Enterprise Edition. It has been determined that 4GB RAM will be needed. The customer is trying to decide between the two following configurations: (1)An IBM xSeries x366 with 4 Xeon MP processors and 4 x 1GB memory DIMMs. (2)An IBM xSeries x445 with 4 Xeon MP processors and 8 x 1GB memory DIMMs. Which question should be asked to guide the customer in selecting the correct memory configuration?()
A FastT Host FC-2 bus adapter, a U320 SCSI adapter, and three 10/100Mb Ethernet adapters have to be installed as optimally as possible. This is going to be a 24X7 system. The addition of extra PCI-cards is a major consideration as well. Based on the following, what is the best configuration?()(1)Slot 1 66MHz Bus 1 (2)Slot 2 66MHz Bus 1 (3)Slot 3 100MHz Bus 2 (4)Slot 4 100Mhz Bus 2 (5)Slot 5 133Mhz Bus 3 (6)Slot 6 133Mhz Bus 3
A company wants a solution to consolidate their storage using the DS4000 series and implement a disaster recovery solution across two data centers linked by fibre to duplicate the production environment.The customer requires a solution with the least amount of system administration. Which configuration would provide the best solution?()