A.increase the capacity of the coil
B.increase the superheat at the bulb
C.deliver more refrigerant to the coil
D.decrease the capacity of the coil
您可能感兴趣的试卷
你可能感兴趣的试题
A.Centrifugal
B.Reciprocating
C.Gear
D.Rotary
A.a high suction head
B.rotating rings
C.badly worn bearings
D.a loose stuffing box gland
A.solenoid valve to seize
B.compressor to hunt
C.formation of flash gas in the liquid line
D.expansion valve to freeze open
A.insufficient condenser cooling water
B.excessive condenser cooling water
C.air in the refrigeration system
D.excessive refrigerant in the system
A.Thermal expansion valve frozen open
B.Suction gas heat exchanger bypassed
C.Condenser clogged or fouled
D.High pressure cutout switch inoperative
A.noise and vibration
B.an increase in discharge pressure
C.an increase in suction pressure
D.lifting of the relief valve
A.insufficient cooling water flow to the condenser
B.a low refrigerant charge in the system
C.the liquid valve is open too much
D.high evaporator superheat
A.dead band action
B.neutral zone action
C.range
D.on-off action
A.cavitation
B.electrolysis
C.abrasion
D.corrosion
A.the relief valve should open before the high pressure cutout
B.the relief valve should open and allow the excess refrigerant to flow to the receiver
C.the high pressure cutout switch should operate before the relief valve opens
D.you should close in on the suction valve
最新试题
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
When the steering gear is in operation, you should ().
A grease gun is generally used to lubricate a ().
The output volume of a positive fixed displacement pump can be changed only by ().
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()
Low compressor head pressure in a refrigeration system can be caused by().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
An excessive charge of refrigerant in an air-cooled refrigeration system can cause ().
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().
The major source of chemical contaminants in hydraulic fluid is ().