A.fuel control rack had admitted excessive fuel
B.engine speed does not match the fuel rack setting
C.engine has failed to reach its firing speed
D.starter pinion and ring gear contact is not correct
您可能感兴趣的试卷
你可能感兴趣的试题
A.an obstruction in an cylinder
B.water accumulation in some engine cylinders
C.low starting air pressure
D.low scavenge air pressure
A.proper fuel injection
B.water in the fuel
C.incomplete combustion
D.burning of lube oil
A.an insufficient speed droop setting
B.an overloaded engine
C.clogged drain holes in the oil control rings
D.complete combustion
A.late ignition
B.water in the fuel
C.high compression temperature
D.starting valve stuck open
A.White
B.Black
C.Blue
D.Clear
A.low ignition quality
B.a high volatility
C.low ignition delay
D.a high cetane number
A.inoperative turbocharger
B.inadequate fuel supply
C.overload on one cylinder
D.unequal load distribution
A.governor sensitivity
B.exhaust temperature
C.fuel injection pressure
D.speed of the can shaft
A.low air charge temperature
B.high cranking speed
C.excessive fuel dilution of lube oil
D.high compression pressure
A.fuel lines
B.lube oil filter
C.crank case pump
D.rocker arm reservoir
最新试题
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
Using a file without a handle may result in ()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
() is not installed on the main switchboar.
The treatment of the fuel oils involves storage, heating, filtering and()
The ISPS Code consists of a mandatory section-Part A, which shows()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()